We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro SYS-6019P-MT 1U dual LGA 3647 barebone server

SKU CH-178D-J3VPA MPN SYS-6019P-MT

1U rackmount barebone with dual LGA 3647 sockets for Xeon Scalable CPUs, four hot-swap 3.5" SATA bays, up to 1 TB DDR4-2666 ECC memory and a single PCIe 3.0 x8 slot

  • Form Factor1U Rackmount
  • WorkloadGeneral Purpose Server
  • CPU TypeDual Socket P (LGA 3647) Intel Xeon Scalable Processors, Dua
  • CPU SocketDual LGA 3647
  • North BridgeIntel C621
  • Max Memory SupportedUp to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666 M
  • Dual LGA 3647 sockets support scalable Xeon performance
  • 1U rackmount depth of 19.98 inches fits dense deployments
  • Four hot-swap 3.5-inch SATA bays simplify storage maintenance
  • Up to 1TB ECC DDR4 at 2666 MHz ensures data integrity
  • Dedicated IPMI LAN port enables remote server management

Dual LGA 3647 1U barebone

The Supermicro SYS-6019P-MT is a 1U rackmount server barebone built around dual LGA 3647 sockets for Intel Xeon Scalable processors with dual UPI up to 10.4 GT/s. It supports CPUs from 70 W to 140 W TDP and the Intel C621 chipset. Eight DIMM slots accept ECC DDR4 up to 2666 MHz for a maximum of 1 TB 3DS LRDIMM or 512 GB RDIMM. Four hot-swap 3.5 in. SATA3 bays and a single PCI-E 3.0 x8 full-height half-length slot provide internal expansion.

General-purpose density builds

This chassis suits integrators assembling dual-socket Xeon servers for general-purpose workloads where 1U density and front hot-swap SATA drives are priorities. The single x8 PCIe slot and two 1000BASE-T LAN ports limit I/O breadth, so builders who need multiple add-in cards, higher-speed networking, or additional drive bays should consider other platforms. A dedicated IPMI LAN port and Aspeed AST2500 BMC handle remote management.

Single PCI-E 3.0 x8 slot

Only one PCI-E 3.0 x8 full-height half-length slot is available for add-in cards, which constrains GPU, storage-controller or high-speed NIC options. If the deployment requires more than one expansion card, this barebone will not meet that need.

Highlights

  • Dual LGA 3647 sockets support scalable Xeon performance
  • 1U rackmount depth of 19.98 inches fits dense deployments
  • Four hot-swap 3.5-inch SATA bays simplify storage maintenance
  • Up to 1TB ECC DDR4 at 2666 MHz ensures data integrity
  • Dedicated IPMI LAN port enables remote server management

Specifications

BrandSUPERMICRO
ModelSYS-6019P-MT
Form Factor1U Rackmount
WorkloadGeneral Purpose Server
CPU TypeDual Socket P (LGA 3647)
Intel Xeon Scalable Processors,
Dual UPI up to 10.4GT/s
Support CPU TDP 70-140W
CPU SocketDual LGA 3647
North BridgeIntel C621
Max Memory SupportedUp to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666 MHz
Memory Type Supported2666 / 2400 / 2133 MHz ECC DDR4 SDRAM
Serial ATA4 x SATA 600
SATA RAIDRAID 0/1/5/10
GPU/VPUAspeed AST2500 BMC
PCI Express1 x PCI-E 3.0 x8 (FHHL) slot
Number of LANMarvell 88E1512 PHY Gigabit Ethernet controller
Supports 1000BASE-T
Hot-Swap Bays4 x Hot-swap 3.5" SATA3 drive bays
Rear USB2 x USB 2.0 port
RJ452 x RJ45 Gigabit Ethernet LAN ports
1 x RJ45 Dedicated IPMI LAN port
FeaturesDual socket P (LGA 3647) supports Intel Xeon Scalable Processors, Dual UPI up to 10.4GT/s
Up to 1TB ECC 3DS LRDIMM, up to DDR4-2666 MHz; 8 x DIMM slots
1 x PCI-E 3.0 x8 (FHHL) slot
4 x Hot-swap 3.5" SATA3 drive bays Optional PCIe / SATA M.2 drive M.2 holder: MCP-450-00003-0N
2 x GbE LAN ports via Marvell 88E1512
IPMI 2.0 + KVM with Dedicated LAN
1 x VGA, 2 x USB 2.0 (rear)
2 x SuperDOM (Disk on Module) ports; 1 x PCIe / SATA M.2 drive connector
500W High-Efficiency Power Supply Platinum Level Certified
Dimensions1.70" x 17.20" x 19.98"
Shipping weight14.83 kg
Package size752 × 599 × 208 mm

Questions about this item

What PCIe generation and lane width does the single expansion slot provide?

The server includes one PCIe 3.0 x8 slot in a full-height half-length form factor.

What rack depth clearance does the 1U chassis require?

The chassis measures 19.98 inches deep, so allow at least that much rail space plus cable room.

How are the processors and memory installed in the barebone?

Fit two LGA 3647 Xeon Scalable CPUs into the sockets, then populate the eight DIMM slots with ECC DDR4 RDIMM or 3DS LRDIMM modules up to 2666 MHz.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.