Supermicro
Supermicro SYS-6017R-73THDP 1U barebone server, dual LGA 2011, 16 DIMM slots, 12×3.5″ bays, 650W PSU
1U rackmount barebone with dual LGA 2011 sockets, 16 DDR3 DIMM slots and twelve 3.5″ drive bays
- Form Factor1U Rackmount
- CPU TypeSupport Dual Intel Xeon processor E5-2600 and E5-2600 v2 fam
- CPU SocketDual LGA 2011
- Installed CPUNo CPU Installed
- Max Processors2
- North BridgeIntel C602
- Dual Xeon E5-2600 v2 support up to 130W TDP each
- 16 DDR3 DIMM slots accept up to 1TB ECC LRDIMM
- 12 fixed 3.5″ drive bays with 8 SAS2 ports via LSI 2308
- 650W high-efficiency power supply included
- PCIe 3.0 x8 low-profile slot for expansion cards
Dual LGA 2011 1U barebone server
The Supermicro SYS-6017R-73THDP is a new 1U rackmount barebone server that accepts two Intel Xeon E5-2600 or E5-2600 v2 processors up to 130W TDP each. It targets system integrators and IT departments building dense storage or compute nodes. Sixteen 240-pin DDR3 slots support up to 1TB LRDIMM, 512GB RDIMM or 192GB UDIMM capacity with ECC. Twelve fixed 3.5-inch drive bays provide high-density local storage in a single rack unit.
Sustained load behaviour
Dual 130W processor support combined with a 650W high-efficiency power supply allows continuous operation at rated TDP without thermal throttling in standard rack environments. The Intel C602 chipset and LSI 2308 controller deliver eight 6Gbps SAS2 ports plus six SATA ports with hardware RAID 0, 1, 5, 10 and software RAID 0, 1, 10 for consistent throughput under heavy I/O. Matrox G200eW graphics handle remote management consoles without adding GPU heat.
Build quality and daily implications
Fixed 3.5-inch bays simplify drive installation but prevent hot-swap servicing without chassis modification. Two low-profile expansion slots — one PCIe 2.0 x4 in an x8 connector and one PCIe 3.0 x8 — limit add-in cards to half-height or low-profile form factors. Dual Intel X540 1 Gigabit LAN ports provide redundant network paths for management and data traffic. The compact 1U depth suits standard cabinets but restricts cooler height to low-profile models only.
Highlights
- Dual Xeon E5-2600 v2 support up to 130W TDP each
- 16 DDR3 DIMM slots accept up to 1TB ECC LRDIMM
- 12 fixed 3.5″ drive bays with 8 SAS2 ports via LSI 2308
- 650W high-efficiency power supply included
- PCIe 3.0 x8 low-profile slot for expansion cards
Specifications
| Brand | SUPERMICRO |
|---|---|
| Model | SYS-6017R-73THDP+ |
| Form Factor | 1U Rackmount |
| CPU Type | Support Dual Intel Xeon processor E5-2600 and E5-2600 v2 family (up to 130W TDP) |
| CPU Socket | Dual LGA 2011 |
| Installed CPU | No CPU Installed |
| Max Processors | 2 |
| North Bridge | Intel C602 |
| Memory Slots | 16 x 240Pin |
| Installed Memory Size | No Memory Installed |
| Max Memory Supported | Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type Supported | DDR3 1866/1600/1333/1066 |
| ECC Supported | Yes |
| Registered | Yes |
| Installed HDD | No Storage Installed |
| Serial ATA | 2 x SATA 600 + 4 x SATA 300 |
| SATA RAID | RAID 0, 1, 5, 10 |
| SAS | 8 SAS2 ports (6Gbps) SAS2 (6Gbps) via LSI 2308 SW RAID 0, 1, 10 support |
| GPU/VPU | Matrox G200eW |
| PCI Express | 1x PCI-E 2.0 x4 (in x8, Half-height) slot 1x PCI-E 3.0 x8 (Low-profile) slot |
| First LAN | Intel X540 |
| Max. LAN Speed | 1 Gigabit |
| 3.5" Bays | 12x Fixed 3.5" HDD bays (connected to onboard 8x LSI 2308 SAS2 Ports and 4x SATA2/3 Ports) |
| COM | 1x Fast UART 16550 ports (rear/header) |
| VGA | 1 |
| Rear USB | 3x USB 2.0 ports (2x rear + 1x Type A) |
| RJ45 | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| Max. Power | 650W AC-DC High Efficiency Power Supply |
| Features | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Front Panel Buttons Power On/Off button LEDs Network activity LEDs SAS/SATA HDD Backplane 4x 40x56mm PWM cooling fans 4x 40x28mm PWM cooling fans |
| Dimensions | 35.75" x 17.2" x 1.7" (D x W x H) |
| Weight | Gross: 38lbs |
Questions about this item
How much heat does the 650 W PSU need to dissipate when two 130 W Xeon CPUs run all day?
Each CPU can draw up to 130 W, so the pair may consume 260 W plus memory and drives; the 650 W supply is rated to handle that load continuously.
Which DDR3 modules must I supply to populate the 16 DIMM slots?
The board accepts DDR3 1866/1600/1333/1066 ECC LRDIMM, RDIMM or UDIMM up to 1 TB total; no memory is installed.
Can my existing 3.5″ SATA drives connect to the 2 SATA 600 and 4 SATA 300 ports?
Yes, the six onboard SATA ports support 6 Gbps and 3 Gbps drives; the 12 drive bays are wired to the SAS2 backplane and the SATA controller.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



