We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Supermicro CBL-SAST-0699 SAS SATA cable 2.95 ft Mini-SAS HD to four SATA 30 AWG

Supermicro

Supermicro CBL-SAST-0699 SAS/SATA cable 2.95 ft Mini-SAS HD to 4 SATA 30 AWG server accessory

SKU CH-815N-C5ZD0 MPN CBL-SAST-0699

Connects a Mini-SAS HD port to four SATA drives at 1.50 GB/s over 2.95 ft of 30 AWG cable

  • Connects four SATA drives via Mini-SAS HD
  • 95 ft length fits tight server chassis
  • 30 AWG wire supports 1.50 GB/s data rate
  • REACH and RoHS certified for environmental compliance
  • Supermicro CSE-M14TQC mobile rack compatible

Targeted server storage link

The Supermicro CBL-SAST-0699 is a SAS/SATA cable built for internal server storage connections. It suits administrators wiring Supermicro CSE-M14TQC mobile racks or similar backplanes that accept Mini-SAS HD and four SATA ports.

Mini-SAS HD fan-out with 30 AWG conductors

A Mini-SAS HD plug on one end splits to four SATA connectors on the other, using 30 AWG wire rated for 1.50 GB/s transfer. The 2.95 ft length fits typical chassis routing without excess slack, and REACH plus RoHS certification confirms restricted-substance compliance.

Replaces worn or missing Mini-SAS HD to SATA cables

Use it when a backplane-to-drive link fails, when expanding a mobile rack, or when the original cable is too short for a new chassis layout. The jump is worth it only if the host side presents a Mini-SAS HD port and the drives use standard SATA connectors.

Highlights

  • Connects four SATA drives via Mini-SAS HD
  • 95 ft length fits tight server chassis
  • 30 AWG wire supports 1.50 GB/s data rate
  • REACH and RoHS certified for environmental compliance
  • Supermicro CSE-M14TQC mobile rack compatible

Specifications

No published specifications for this item yet.

Questions about this item

What data rate does the Mini-SAS HD to 4 SATA cable support?

The cable supports a data transfer rate of 1.50 GB/s over the SAS/SATA interface.

What drive bay clearance is required for the four SATA connectors?

The four SATA connectors are designed for the Supermicro CSE-M14TQC Mobile Rack, so the bay must accept that rack.

How do I connect the cable to the controller and drives?

Plug the Mini-SAS HD end into the controller port and each SATA end into a drive; a common mistake is reversing the Mini-SAS HD orientation.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.