We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini-SAS SFF-8087 plug branching to four SATA connectors on a 70 cm cable

Supermicro

Supermicro CBL-0237L-01 Mini-SAS (SFF-8087) to 4x SATA internal power cable 70cm

SKU CH-NFR5-N8G4M

Connects a Mini-SAS (SFF-8087) port to four SATA drives with a 70 cm internal cable

  • Connect four SATA drives from one Mini-SAS port
  • 70 cm length fits full-tower chassis routing
  • 30 AWG conductors reduce voltage drop on power lines
  • SFF-8087 iPass connector locks securely to backplanes
  • Supports SAS and SATA signalling on each port

Connection purpose

This 70 cm internal cable links a Mini-SAS SFF-8087 port to four SATA devices. It suits builders adding multiple drives to a server or workstation backplane. The IPass design carries data only, so separate power connections are still required for each drive. Buyers needing a single-cable power-and-data solution should look elsewhere.

Compatibility check

Verify that your controller or backplane presents a Mini-SAS SFF-8087 internal connector. Confirm the chassis has enough clearance for a 70 cm cable run and that each target drive uses a standard SATA data port. The cable uses 30 AWG conductors and does not supply power, so ensure your power supply has sufficient SATA power leads for all four drives.

Build integration

The assembly plugs directly into the SFF-8087 header and fans out to four SATA plugs, freeing the installer from routing four separate cables. Its 2.3 ft length reaches most mid-tower and rack-mount drive cages without excess slack. Because it carries data only, the cable leaves power distribution to the existing PSU harness, keeping cable management simple.

Highlights

  • Connect four SATA drives from one Mini-SAS port
  • 70 cm length fits full-tower chassis routing
  • 30 AWG conductors reduce voltage drop on power lines
  • SFF-8087 iPass connector locks securely to backplanes
  • Supports SAS and SATA signalling on each port

Specifications

No published specifications for this item yet.

Questions about this item

What connectors are on each end of the CBL-0237L-01 cable?

One end has a Mini-SAS (SFF-8087) iPass connector and the other end splits into four SATA connectors.

Is the 70 cm length suitable for a full-tower chassis?

At 70 cm (2.3 ft) the cable reaches from a motherboard Mini-SAS port to drives mounted in typical full-tower drive bays.

What wire gauge is used and why does it matter?

The cable uses 30 AWG conductors, which keep the assembly flexible for tight internal routing while carrying SATA power and signal currents.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.