Aukuoy 8-Pin PSU Male to 6+2 Pin GPU Male Braided PCIe Cable 65cm
Converts an 8-pin PSU output to a 6+2-pin GPU connector with a 65 cm braided cable for compatible Corsair, Thermaltake and ARESGAME modular power supplies
- TypeExtension Cable
- Length< 1"
- Cable Length32.8 ft.
- SpecificationsPC060a, 8PIN PSU PCIe Cable, Aukuoy
- Sports Team1 Piece
- Terminal GenderMale to Female
- Converts 8-pin PSU output to 6+2-pin GPU connector for flexible GPU power
- Braided sleeving protects wires and improves airflow inside the case
- 65 cm cable length gives ample reach for tidy routing in large chassis
- Compatible with listed Corsair AXi, HXi, RMi, RMX, RM, SF, CS-M, CX-M, TX-M series
- Works with Thermaltake Toughpower TF1, GF1, PF1, GF3 SFX and ARESGAME AGK/AGT/AGS models
PSU-to-GPU cable for Corsair and Thermaltake units
This 65 cm braided adapter converts an 8-pin male PSU output into a 6+2-pin male GPU connector. It is built for Corsair AX, AXi, HXi, HX, RMi, RMX, RM, SF, CS-M, CX-M and TX-M series, plus Thermaltake RGB Gold, RGB Platinum, ARGB Gold, Toughpower TF1, GF1, PF1, GF3 and SFX models. ARESGAME AGK750, AGK850, AGT1000, AGS750 and AGS850 units are also supported.
Compatibility notes and limitations
The cable does not fit Corsair AX1200, AX Gold or HX Bronze and White units. Builders using other modular PSUs should verify pin-outs before ordering. The 2.13 ft length suits mid-tower routing but may fall short in full-tower or dual-chassis layouts. Buyers who need longer runs or a different connector orientation cannot be accommodated by this item.
Braided construction and daily handling
The sleeved jacket resists abrasion and keeps wires tidy behind the motherboard tray. Male-to-male terminals lock securely into both the PSU and graphics card, reducing the chance of accidental disconnection during transport or upgrades. No extra adapters or software are required; the cable simply plugs in and routes power. Users who prefer unsleeved or right-angle connectors will need a different solution.
Highlights
- Converts 8-pin PSU output to 6+2-pin GPU connector for flexible GPU power
- Braided sleeving protects wires and improves airflow inside the case
- 65 cm cable length gives ample reach for tidy routing in large chassis
- Compatible with listed Corsair AXi, HXi, RMi, RMX, RM, SF, CS-M, CX-M, TX-M series
- Works with Thermaltake Toughpower TF1, GF1, PF1, GF3 SFX and ARESGAME AGK/AGT/AGS models
Specifications
| Brand | Apple |
|---|---|
| Model | PC060a |
| Type | Extension Cable |
| Length | < 1" |
| Cable Length | 32.8 ft. |
| Specifications | PC060a, 8PIN PSU PCIe Cable, Aukuoy |
| Sports Team | 1 Piece |
| Terminal Gender | Male to Female |
| Features | 8PIN PSU PCIe Cable, Aukuoy, PC060a |
Questions about this item
Will the 8-pin PSU connector on this cable need replacing after repeated GPU swaps?
The 8-pin PSU male end is a fixed modular plug; it stays in the power supply and does not wear from GPU changes.
What stops the 65 cm braided cable from delivering full power to a high-end card under load?
The 6+2 pin GPU male connector is rated for standard PCIe power limits; the cable itself does not impose a lower ceiling.
Does the braided sleeve trap heat when the cable runs at full load all day?
The open-weave braid allows airflow around the conductors, so heat does not build up during sustained use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
