We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server front with ten 2.5 inch drive bays

Supermicro

Supermicro AS-1115CS-TNR barebone server 12 DIMM 10×2.5" 860W

SKU CH-930T-FXAQX MPN AS-1115CS-TNR

A 1U barebone server supporting a single EPYC 9004 processor, 12 DDR5 DIMM slots, 10 hot-swap 2.5-inch NVMe/SATA/SAS bays and dual 860W Platinum supplies

  • Supports 3 TB DDR5-4800 memory capacity via 12 DIMM slots
  • Dual AIOM OCP 3.0 networking plus dedicated IPMI LAN port
  • Ten hot-swap 2.5" bays accept NVMe SATA SAS drives
  • Two PCIe 5.0 x16 full-height slots for accelerator cards
  • Redundant 860 W Platinum power supplies 100-240 Vac 200-240 Vdc

Purpose-built 1U platform

The Supermicro AS-1115CS-TNR is a 1U barebone server designed for single-socket AMD EPYC 9004 series processors. It targets organisations building dense compute or storage nodes where rack space and power efficiency are primary constraints.

Hybrid storage density and redundant power

Twelve DDR5 DIMM slots support up to 3TB of ECC memory at 4800MHz. Ten front-accessible 2.5-inch bays accept NVMe, SATA or SAS drives in any mix. Dual 860W Platinum power supplies operate from 100-240Vac or 200-240Vdc and provide full redundancy under supported configurations.

Dual AIOM networking and PCIe 5.0 expansion

Two OCP 3.0 AIOM slots with NCSI handle networking duties alongside a dedicated IPMI LAN port. Two PCIe 5.0 x16 full-height half-length slots accommodate accelerators or high-speed NICs. Two onboard M.2 slots take 80mm or 110mm NVMe boot devices. Not suited for dual-socket requirements or GPU-heavy workloads beyond the two x16 slots.

Highlights

  • Supports 3 TB DDR5-4800 memory capacity via 12 DIMM slots
  • Dual AIOM OCP 3.0 networking plus dedicated IPMI LAN port
  • Ten hot-swap 2.5" bays accept NVMe SATA SAS drives
  • Two PCIe 5.0 x16 full-height slots for accelerator cards
  • Redundant 860 W Platinum power supplies 100-240 Vac 200-240 Vdc

Specifications

No published specifications for this item yet.

Questions about this item

What PCIe generation do the two full-height half-length slots use, and what bandwidth does that cap each slot at?

The two FHHL slots are PCIe 5.0 x16, so each slot is capped at the 5.0 x16 electrical bandwidth available from the EPYC 9004 processor.

What physical drive bays and form factor does the chassis provide for the ten hot-swap slots?

The front panel holds ten 2.5-inch hot-swap bays that accept NVMe, SATA or SAS drives in a hybrid configuration.

How are the two on-board M.2 boot devices installed, and which mounting step is commonly missed?

Each M.2 slot takes an 80 mm or 110 mm NVMe module at PCIe 3.0 x2; the step often missed is securing the module with the screw and standoff before closing the chassis.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.