STARTECH
STARTECH NLYL-1F-CAT6A-PATCH network ethernet cable 1ft yellow 10G 100W PoE S/FTP LSZH 27AWG
One-foot yellow Cat6a patch cable with snagless RJ45 plugs, S/FTP shielding, LSZH jacket, 27 AWG pure copper, rated for 10 Gbps at 500 MHz and 100 W PoE
- Snagless RJ45 connectors protect the locking tab during installation
- Cat6a S/FTP shielding supports 10 Gbps at 500 MHz bandwidth
- 100 W Power over Ethernet capability delivers power and data together
- LSZH jacket emits minimal smoke and no halogen in fire events
- 27 AWG pure bare copper conductors ensure reliable signal integrity
One-Foot Yellow Cat6a Patch Cable
This one-foot yellow Cat6a patch cable uses snagless RJ45 connectors and pure bare copper conductors. It is built for short runs between a switch and a device in a rack or on a desk. The S/FTP shielding and 27 AWG gauge support 10 Gbps at 500 MHz bandwidth. Buyers who need longer reach or outdoor-rated jackets should choose a different cable.
Snagless Connectors and LSZH Jacket
Snagless RJ45 plugs protect the locking tab during frequent reconnects in dense patch panels. The low-smoke zero-halogen jacket meets fire-safety requirements for plenum and riser spaces. Double shielding reduces alien crosstalk in high-density bundles. Installers who require armoured or direct-burial construction will need a different product.
100 Watt PoE Delivery Over Short Distance
The 27 AWG pure copper cores carry up to 100 W of Power over Ethernet without excessive voltage drop across the one-foot length. Shielded twisted pairs keep signal integrity clean for 10 Gbps traffic while PoE loads are active. The cable runs cool and silent because it has no active components. Deployments needing higher wattage or longer PoE runs must verify voltage drop separately.
Highlights
- Snagless RJ45 connectors protect the locking tab during installation
- Cat6a S/FTP shielding supports 10 Gbps at 500 MHz bandwidth
- 100 W Power over Ethernet capability delivers power and data together
- LSZH jacket emits minimal smoke and no halogen in fire events
- 27 AWG pure bare copper conductors ensure reliable signal integrity
Specifications
No published specifications for this item yet.
Questions about this item
Does the S/FTP Cat6a cable support 10 Gbps and 500 MHz?
Yes, the S/FTP Cat6a cable is rated for 10 Gbps data rates and a 500 MHz bandwidth.
What connector type and wire gauge does this cable use?
The cable uses snagless RJ45 connectors and 27 AWG pure bare copper conductors.
How do you install the cable without damaging the connector?
Align the RJ45 plug with the port, push straight in until the latch clicks, and pull the cable body — not the tab — when removing it.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



