STARTECH
STARTECH NLGN-1F-CAT6A-PATCH network ethernet cable 1ft green Cat6a S/FTP 10G 500MHz 100W PoE 27AWG
Green 1 ft Cat6a patch cable with snagless RJ45 plugs, S/FTP shielding and LSZH jacket rated for 10 Gbps, 500 MHz and 100 W PoE
- 10 Gbps speed backed by Cat6a 500 MHz bandwidth
- 100 W PoE support for high-power devices
- Snagless RJ45 clips protect connector tabs
- LSZH jacket reduces toxic smoke in fire
- 27 AWG pure bare copper conductors for signal integrity
1 ft Cat6a S/FTP patch cable
This 1 ft green Cat6a patch cable uses S/FTP shielding and 27 AWG pure bare copper conductors. It is built for 10 Gbps Ethernet at 500 MHz and carries up to 100 W PoE. Snagless RJ45 connectors protect the latch during frequent moves. The LSZH jacket reduces smoke and halogen emission in fire conditions.
Who should use this cable
Suited for short rack-to-device links, dense patch panels, and PoE++ endpoints that need 10 Gbps in a 1 ft reach. The LSZH jacket meets low-smoke requirements in regulated buildings. Not for installers who need longer runs, different colour coding, or non-shielded UTP construction.
10 Gbps at 500 MHz over 1 ft
The cable is rated for 10 Gbps throughput at 500 MHz bandwidth across its 1 ft length. This single figure decides whether the link meets 10GBASE-T and PoE++ power budgets in your rack.
Highlights
- 10 Gbps speed backed by Cat6a 500 MHz bandwidth
- 100 W PoE support for high-power devices
- Snagless RJ45 clips protect connector tabs
- LSZH jacket reduces toxic smoke in fire
- 27 AWG pure bare copper conductors for signal integrity
Specifications
| Brand | StarTech |
|---|---|
| Shipping weight | 0.45 kg |
| Package size | 229 × 160 × 132 mm |
Questions about this item
How do I install the snagless RJ45 connectors without damaging the latch?
Press the RJ45 plug straight into the port until the snagless latch clicks; the angled boot protects the tab so you do not need to hold it down while inserting.
Will the LSZH jacket or 27AWG conductors need replacement after a certain period?
The LSZH jacket resists flame spread and the 27AWG pure bare copper conductors are solid for the cable life; no scheduled replacement is required unless physical damage occurs.
At what point does the 500MHz bandwidth limit appear during sustained 10Gbps PoE loads?
The cable is rated for 500MHz and 10Gbps up to 100W PoE; the bandwidth ceiling is reached only if the link tries to exceed 10Gbps signalling rates.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



