We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 100 ft Cat6 Ethernet cable with snagless RJ45 connectors and molded strain relief

STARTECH

STARTECH N6PATCH100WH network ethernet cable 100 ft white Cat6

SKU CH-HDH6-4F1R3 MPN N6PATCH100WH

A 100 ft white Cat6 patch cable with snagless RJ45 connectors, 24 AWG solid copper conductors and 250 MHz bandwidth for gigabit Ethernet and PoE

  • TypeNetwork Cable
  • Cat6
  • Connector A1 - RJ-45 Male
  • Connector B1 - RJ-45 Male
  • Length100 ft
  • ColorWhite
  • 100 ft reach for flexible device placement
  • Snagless RJ45 clips protect connectors during routing
  • 24 AWG 100 % copper conductors ensure signal integrity
  • ETL verified Cat6 supports 1 Gbps and PoE
  • 250 MHz bandwidth handles multi-gigabit speeds

100 ft Cat6 patch cable

This 100 ft white Cat6 patch cable uses 24 AWG stranded 100 % copper conductors with 50‑micron gold RJ45 contacts. Snagless boots protect the connector clips during installation. It is built for gigabit and multi‑gigabit Ethernet links up to 160 ft. ETL verified and UL rated wire ensure reliable performance.

Sustained multi‑gigabit throughput

The cable is specified for 1, 2.5, 5 and 10 Gbps operation across the full 100 ft length. Tested to keep near‑end crosstalk within limits at 650 MHz, it maintains signal integrity under continuous high‑speed traffic without the degradation seen on shorter‑burst ratings. PoE loads up to 100 W are supported end‑to‑end.

Thermal and power profile

Passive copper construction produces no heat or noise of its own. The 24 AWG 100 % copper conductors minimise resistive loss, so the cable adds negligible voltage drop even at 100 W PoE. No active cooling or external power is required, making it silent and thermally neutral in any rack or wall run.

Highlights

  • 100 ft reach for flexible device placement
  • Snagless RJ45 clips protect connectors during routing
  • 24 AWG 100 % copper conductors ensure signal integrity
  • ETL verified Cat6 supports 1 Gbps and PoE
  • 250 MHz bandwidth handles multi-gigabit speeds

Specifications

BrandStarTech.com
ModelN6PATCH100WH
TypeNetwork Cable
Cat6
Connector A1 - RJ-45 Male
Connector B1 - RJ-45 Male
Length100 ft
ColorWhite
FeaturesRJ45 connector clip protectors
Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits
Colored hoods for departmental color coding
Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point
Constructed with top quality components
High quality 24 AWG copper wire
ETL Verified
Patches from hub to distribution panel
Connects workstation to wall outlet
Extend the reach of your Gigabit network devices by 100 ft
Shipping weight1.36 kg
Package size257 × 251 × 23 mm

Questions about this item

Does the 100 ft length affect power delivery for 100W PoE devices?

The 24 AWG stranded copper conductors support 100W PoE up to 160 ft, so the 100 ft run stays within the rated distance for full power delivery.

What connectors are needed on my switch and device for this cable to work?

Both ends use standard RJ45 male plugs, so any switch, router, PC or NAS with a regular RJ45 port will accept the cable directly.

Will this Cat6 cable work with my existing Cat5e patch panel and older router?

Yes, it is backward compatible with Category 5e and Category 6 applications, so it connects to legacy Cat5e panels and routers without issues.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.