STARTECH DVIDDMM10 Dual Link DVI-D Cable 10 ft Male to Male 2560x1600
- DVI-D to DVI-D
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
A 20 ft DVI-D dual-link male-to-male cable supporting up to 2560×1600 resolution at 9.9 Gbit/s with a ferrite core to reduce EMI interference
Struck-through versions exist but are not stocked here.
This 20-foot DVI-D dual-link cable connects a desktop or laptop computer to a DVI-D dual-link display or projector. The male-to-male connectors deliver a high-speed digital signal up to 9.9 Gbits/sec over the full length. A ferrite core suppresses EMI interference for a stable image. The black jacket suits permanent or semi-permanent installations.
The single specification that decides fit is the dual-link bandwidth, which supports resolutions up to 2560×1600 at 60 Hz. Single-link cables cannot carry that resolution, so this cable is required for monitors such as the ASUS VS228H-P, Acer G246HL, HP Pavilion C4D33AA#ABA or ViewSonic VA2446M running at their native maximum. It will not add dual-link capability to a single-link source or sink.
The cable is thick but flexible enough to route behind desks or through cable trays without kinking. The ferrite core sits near one connector and adds slight bulk, so allow a little extra clearance at that end. Screw-in thumbscrews secure each DVI plug; hand-tighten them to avoid stripping the threads. No drivers or configuration are needed — the link is purely passive.
| Brand | StarTech.com |
|---|---|
| Model | DVIDDMM20 |
| Type | DVI-D to DVI-D |
| Color | Black |
| Cable Length | 20 ft. |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Features | Provides a high-speed crystal-clear connection to your DVI digital devices with a long 20 foot cable Connect your desktop or laptop computer to a DVI-D Dual Link display or projector High-speed digital transmission rate of up to 9.9 Gbits/sec Ferrite core eliminates EMI interference Long Monitor Cable 20ft Will support the ASUS VS228H-P / Acer G246HL / HP Pavillion C4D33AA#ABA / ViewSonic VA2446M at their max resolutions as well as monitors with resolutions of up to 2560x1600 |
| Shipping weight | 0.63 kg |
| Package size | 295 × 246 × 69 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
It provides the bandwidth needed for DVI-D Dual Link signals up to 2560x1600 resolution without compression or scaling.
The cable follows the DVI-D Dual Link specification, capping practical output at 2560x1600 at 60 Hz.
Two male DVI-D Dual Link ports and enough space for a 20 ft run with ferrite cores near each end.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?