STARTECH DVIDDMM6 Dual Link DVI-D cable 6 ft 2560x1600
- DVI-D to DVI-D
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
A 10 ft dual-link DVI-D male-to-male cable supports 2560×1600 resolution at 9.9 Gbits/sec with ferrite-core EMI shielding
Struck-through versions exist but are not stocked here.
This 10 ft DVI-D Dual Link cable connects a desktop or laptop computer to a DVI-D Dual Link display or projector. It uses male-to-male connectors for a direct link between source and screen. The cable supports digital video transmission at up to 9.9 Gbits/sec for a crystal-clear image.
A built-in ferrite core eliminates EMI interference to maintain signal integrity across the full cable length. The black cable jacket and dual male terminals provide a straightforward, plug-and-play connection without adapters. The 10 ft length suits typical desktop-to-monitor distances on a desk or across a workstation.
The Dual Link interface supports resolutions up to 2560x1600 at standard refresh rates. It will drive compatible monitors such as the ASUS VS228H-P, Acer G246HL, HP Pavilion C4D33AA#ABA and ViewSonic VA2446M at their native resolutions. Single Link DVI devices or displays requiring higher bandwidth than 9.9 Gbits/sec are not supported by this cable.
| Brand | StarTech.com |
|---|---|
| Model | DVIDDMM10 |
| Type | DVI-D to DVI-D |
| Color | Black |
| Cable Length | 10 ft. |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Features | Provides a high-speed crystal-clear connection to DVI digital devices Connect a desktop or laptop computer to a DVI-D Dual Link display or projector High-speed digital transmission rate of up to 9.9 Gbits/sec Ferrite core eliminates EMI interference Digital Monitor Cable / 10ft Dual Link DVI-D Cable - Will support the ASUS VS228H-P / Acer G246HL / HP Pavillion C4D33AA#ABA / ViewSonic VA2446M at their max resolutions as well as monitors with resolutions of up to 2560x1600 |
| Shipping weight | 0.39 kg |
| Package size | 330 × 127 × 20 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cable carries a Dual Link DVI-D signal up to 2560x1600 resolution at a digital transmission rate of 9.9 Gbits/sec.
Each end uses a standard male DVI-D Dual Link plug; allow enough rear clearance for the connector body plus the ferrite core moulded near each end.
Power off both devices, align the wide flat pin on each male plug with the socket key, insert firmly until the thumbscrews engage, then tighten both screws to lock the connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?