We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey shielded CAT6a cable, fifty feet, snagless RJ45 plugs, strain relief boots

STARTECH

STARTECH 50ft Gray CAT6a Network Ethernet Cable

SKU CH-ESFQ-WP69E

A 50 ft CAT6a patch cord rated for 10 GbE and 100 W PoE++, built with 27 AWG pure copper, S/FTP shielding, LSZH jacket and Fluke-tested 500 MHz performance

  • Supports 10 GbE speeds with 500 MHz bandwidth
  • Delivers up to 100 W PoE++ for powered devices
  • Snagless RJ45 connectors with strain reliefs protect the link
  • S/FTP shielded 27 AWG bare copper ensures signal integrity

50ft Gray CAT6a Cable for 10GbE Networks

This 50-foot StarTech CAT6a patch cord supports 10 Gigabit Ethernet and 100 Watt PoE++ power delivery. It uses shielded S/FTP construction with 27AWG pure bare copper conductors rated to 500 MHz. The LSZH jacket and snagless RJ45 connectors with strain reliefs are Fluke tested and ETL verified.

Verify Connector Clearance and Shielding Needs

Ensure your patch panel or switch ports have enough depth for the snagless boots and that your installation permits shielded S/FTP cabling with proper grounding. The LSZH jacket is suited for plenum or riser spaces requiring low-smoke materials. Buyers needing longer runs beyond 50 feet or unshielded UTP cable should consider a different specification.

Highlights

  • Supports 10 GbE speeds with 500 MHz bandwidth
  • Delivers up to 100 W PoE++ for powered devices
  • Snagless RJ45 connectors with strain reliefs protect the link
  • S/FTP shielded 27 AWG bare copper ensures signal integrity

Specifications

BrandStarTech

Questions about this item

Does the 50ft Gray CAT6a cable include both RJ45 connectors or must they be purchased separately?

The cable arrives with snagless RJ45 plugs already crimped on both ends and integrated strain reliefs, so no additional connectors are required.

Should I choose the 50ft length or a different length for a 10GbE run at 500MHz?

At 50ft the shielded 27AWG pure bare copper construction meets 10GbE and 500MHz performance; select a shorter length only if the distance between devices is less than 50ft.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.