We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex multimode fibre patch cable with LC connectors on both ends, 16.40 ft length

STARTECH

STARTECH 450FBLCLC5 fibre optic cable 16.40 ft LC duplex OM4 50/125 100 Gb

SKU CH-1G2G-3QJPR MPN 450FBLCLC5

A 16.40 ft aqua OM4 duplex multimode cable with LC connectors for 40 and 100 Gigabit links

  • TypeOthers
  • ColorAqua
  • Length16.40 ft.
  • Connector Number2
  • Connector DetailConnector A: 1 - Fiber Optic LC Duplex Male Connector B: 1 -
  • FeaturesOM4 (50/125) 3500MHz multimode fiber Backward compatible wit

Length 5m

  • Ready for 40 and 100 Gigabit networks
  • OM4 50/125 fibre with 3500 MHz bandwidth
  • Laser-optimised multimode fibre for 850 nm VCSEL sources
  • Works with existing 50/125 equipment
  • LC duplex connectors on both ends

Purpose-built patch lead

This aqua-coloured duplex multimode fibre patch cable connects LC duplex transceivers in 40 and 100 Gigabit Ethernet or Fibre Channel links. It is intended for network engineers and data-centre technicians who need a ready-made 16.40 ft jumper for high-speed backbone or switch-to-switch runs.

OM4 50/125 core specification

The single decisive spec is the OM4 (50/125) 3500 MHz laser-optimised multimode fibre, which supports 850 nm VCSEL sources and meets attenuation targets for 40GBase-SR4 and 100GBase-SR10. If your link budget or transceiver datasheet calls for OM3 or single-mode glass, this cable will not satisfy the reach or loss requirements.

Straightforward LC duplex mating

Both ends carry pre-polished LC duplex male ferrules that snap into standard SFP+ or QSFP+ module ports without tools. The main installation risk is contaminating the end-faces; always inspect and clean with a fibre scope and lint-free wipes before seating, and avoid tight bends that exceed the cable’s minimum bend radius.

Highlights

  • Ready for 40 and 100 Gigabit networks
  • OM4 50/125 fibre with 3500 MHz bandwidth
  • Laser-optimised multimode fibre for 850 nm VCSEL sources
  • Works with existing 50/125 equipment
  • LC duplex connectors on both ends

Specifications

BrandStarTech.com
Model450FBLCLC5
TypeOthers
ColorAqua
Length16.40 ft.
Connector Number2
Connector DetailConnector A: 1 - Fiber Optic LC Duplex Male
Connector B: 1 - Fiber Optic LC Duplex Male
FeaturesOM4 (50/125) 3500MHz multimode fiber
Backward compatible with your existing 50/125 equipment
Laser-optimized multimode fiber (LOMMF)
Compatible with 850nm VCSEL source
Attenuation loss meets or exceeds industry standards
Shipping weight0.09 kg
Package size178 × 102 × 51 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How far can the 100 Gb rating actually reach with this cable?

The OM4 multimode fiber supports 100 Gb speeds up to 100 metres, so the 16.40 ft length is well within that limit.

What does the OM4 3500 MHz·km figure mean for real-world bandwidth?

It certifies the 50/125 fibre for 100 Gb Ethernet and Fibre Channel links at 850 nm, with headroom for 40 Gb runs beyond 100 metres.

Will the LC duplex connectors fit standard SFP+ and QSFP+ transceiver ports?

Yes, each end terminates in an LC duplex male connector that mates directly with SFP+ and QSFP+ transceivers used in 40 and 100 Gb equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.