We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

STARTECH

STARTECH 450FBLCLC2 fibre optic cable OM4 duplex LC to LC 2m aqua 50/125 100G

SKU CH-XRME-7HY9S MPN 450FBLCLC2

Connects 40 and 100 Gigabit transceivers using OM4 50/125 laser-optimised multimode fibre with LC duplex ends

  • TypeOthers
  • ColorAqua
  • Length6 ft.
  • Connector Number2
  • Connector DetailConnector A: 1 - Fiber Optic LC Duplex Male Connector B: 1 -
  • FeaturesOM4 (50/125) 3500MHz multimode fiber Backward compatible wit

Length 2m

  • Supports 100 Gigabit networks with OM4 50/125 fiber
  • Laser-optimized multimode fiber reduces signal loss over distance
  • Backward compatible with existing 50/125 equipment
  • Connects 40GBase-SR4 and 100GBase-SR10 transceivers
  • Aqua jacket identifies OM4 multimode cable at a glance

STARTECH OM4 Duplex LC Patch Cable

This 2m aqua fibre cable uses OM4 50/125 multimode fibre with LC duplex connectors on both ends. It is built for 40 and 100 Gigabit Ethernet and Fibre Channel links. The laser-optimised core supports 850nm VCSEL sources and meets industry attenuation standards. It connects SFP+ and QSFP+ transceivers in high-speed network infrastructure.

Suits 40G and 100G short-reach deployments

Installers running 40GBase-SR4 or 100GBase-SR10 links over multimode fibre will use this patch lead. It is backward compatible with existing 50/125 equipment. Buyers needing single-mode fibre, longer reach, or different connector types such as MPO or SC should select another cable.

Simple LC duplex installation

Push-pull LC duplex connectors seat with an audible click; no tools are required. The 2m length fits standard rack-to-panel runs. The most common issue is cross-polarity — verify TX and RX fibres match the transceiver ports before locking the latch. Dirty end-faces cause high loss; clean both ferrules with a lint-free wipe before mating.

Highlights

  • Supports 100 Gigabit networks with OM4 50/125 fiber
  • Laser-optimized multimode fiber reduces signal loss over distance
  • Backward compatible with existing 50/125 equipment
  • Connects 40GBase-SR4 and 100GBase-SR10 transceivers
  • Aqua jacket identifies OM4 multimode cable at a glance

Specifications

BrandStarTech.com
Model450FBLCLC2
TypeOthers
ColorAqua
Length6 ft.
Connector Number2
Connector DetailConnector A: 1 - Fiber Optic LC Duplex Male
Connector B: 1 - Fiber Optic LC Duplex Male
FeaturesOM4 (50/125) 3500MHz multimode fiber
Backward compatible with your existing 50/125 equipment
Laser-optimized multimode fiber (LOMMF)
Compatible with 850nm VCSEL source
Attenuation loss meets or exceeds industry standards
Shipping weight0.05 kg
Package size199 × 151 × 25 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which transceivers must I already have to use this 2m LC duplex cable?

The cable connects 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks.

Will this OM4 patch cable work with my existing 50/125 multimode equipment?

Yes, it is backward compatible with existing 50/125 equipment and supports both 850nm VCSEL laser and LED light sources.

How can I confirm the link is performing at 100G after I install the cable?

Verify the transceivers negotiate 100GBase-SR10 and check that measured attenuation loss meets or exceeds industry standards for OM4 3500MHz fiber.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.