We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.0 cable 3.3 ft with braided jacket and gold connectors

SMUGDESK

SMUGDESK DisplayPort 2.0 cable 3.3 ft 80 Gbps

SKU CH-D2QG-425HK

Delivers 80 Gbps bandwidth for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz over 3.3 ft with VESA certification and triple-layer shielding

  • 80 Gbps bandwidth enables 16K at 60 Hz
  • 4K at 240 Hz for smooth competitive gaming
  • VESA certified DisplayPort 2.0 with HDR 10 and HDCP 2.2
  • Triple-layer shielded 28 AWG cable with 30 000 bend life
  • Gold-plated connectors resist corrosion for lasting signal quality

High-Bandwidth DisplayPort 2.0 Cable

The SMUGDESK DisplayPort 2.0 cable delivers 80 Gbps bandwidth over a 3.3 ft length. It is VESA certified and supports UHBR10, UHBR13.5 and UHBR20 transmission modes. The cable handles 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with Dynamic HDR and HDCP 2.2. It suits gamers and creators who need maximum resolution and refresh rates from a single link.

Replaces Older DisplayPort 1.4 and 1.2 Links

This cable supersedes DisplayPort 1.4 and 1.2 connections that cap at lower bandwidth. The jump is worth it when driving 4K above 144 Hz, 8K at 120 Hz or 16K at 60 Hz without compression artefacts. It also enables 2K at 360 Hz for competitive titles. Builders staying at 4K 60 Hz or 1080p high refresh will not see a difference.

Fits Direct GPU-to-Monitor Runs

The male-to-male connectors plug straight into graphics cards and monitors with standard DisplayPort sockets. Triple-layer shielding and 28 AWG tinned copper keep signals clean near power cables. Gold-plated contacts resist oxidation over thousands of insertions. The nylon braid survives 30,000-plus bends for tight routing behind desks. It frees up no extra ports and requires no external power.

Highlights

  • 80 Gbps bandwidth enables 16K at 60 Hz
  • 4K at 240 Hz for smooth competitive gaming
  • VESA certified DisplayPort 2.0 with HDR 10 and HDCP 2.2
  • Triple-layer shielded 28 AWG cable with 30 000 bend life
  • Gold-plated connectors resist corrosion for lasting signal quality

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors does the 3.3 ft DisplayPort 2.0 cable use?

The cable has male DisplayPort 2.0 connectors on both ends, compatible with DP, DP++, and DisplayPort++ ports on laptops, PCs, TVs, and gaming monitors.

How do I install the cable to enable 16K@60Hz or 4K@240Hz, and what step is often missed?

Connect each end firmly until the latch clicks; then ensure the source device outputs the target resolution and refresh rate, and that DSC is enabled in the graphics driver — this driver setting is the step most often missed.

When should I consider replacing the braided DisplayPort 2.0 cable?

The nylon braided jacket is rated for over 30000 bend cycles; replace the cable if the connectors loosen, the jacket frays, or intermittent signal loss appears during high-bandwidth modes like 80Gbps UHBR20.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.