We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort cable with gold connectors, ten feet long

SMUGDESK

SMUGDESK 8K DisplayPort cable 10 ft DP 1.4 32.4 Gbps HDR10

SKU CH-N8WY-SG7Y6

A VESA-certified DisplayPort 1.4 cable carrying 32.4 Gbps for 8K at 60 Hz, 4K at 144 Hz and HDR10 over ten feet

  • Supports 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz and 2K at 240 Hz for smooth gaming
  • HDR10 and 48-bit deep colour enhance detail in dark scenes
  • Triple-shielded 28 AWG copper with gold-plated connectors resists interference
  • VESA certified and backward compatible with DisplayPort 1.1, 1.2 and 1.3

10 ft VESA Certified DP 1.4 Cable

This ten foot DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz using HBR3 bandwidth of 32.4 Gbps. It suits gamers and professionals who need a single cable for high resolution and high refresh rate displays. The male to male connectors are gold plated for corrosion resistance and the cable is backward compatible with earlier DisplayPort versions.

Thermals Noise and Power Draw

As a passive copper cable it generates no heat of its own and adds no audible noise to the system. Power consumption is limited to the signalling current drawn from the source and sink devices so it does not affect the overall power budget. The triple shielded 28 AWG conductors maintain signal integrity without active electronics.

Aluminum Shell Nylon Braid and Compatibility

The aluminum connector shells and double braided nylon jacket protect the cable from physical stress and electromagnetic interference. Bundled compatibility covers FreeSync and G-Sync variable refresh rate technologies plus HDR10 and HDCP 2.2 for protected content. The cable works with listed RTX graphics cards and any DisplayPort equipped monitor, laptop or projector.

Highlights

  • Supports 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz and 2K at 240 Hz for smooth gaming
  • HDR10 and 48-bit deep colour enhance detail in dark scenes
  • Triple-shielded 28 AWG copper with gold-plated connectors resists interference
  • VESA certified and backward compatible with DisplayPort 1.1, 1.2 and 1.3

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect this 10 ft DisplayPort 1.4 cable and what is the common mistake?

Plug the male DisplayPort connectors into the DP ports on your graphics card and monitor until the latches click; the common mistake is forcing the plug in upside-down, which bends the pins.

What part of this nylon-braided cable with 28AWG copper and gold-plated connectors will need replacement first?

The latch mechanism on the gold-plated DisplayPort connectors typically wears out before the triple-shielded 28AWG copper conductors or the nylon braid.

At what point does the 32.4 Gbps HBR3 bandwidth limit appear during sustained 8K@60Hz HDR10 use?

The 32.4 Gbps HBR3 ceiling is reached immediately when driving 8K at 60 Hz with 48-bit HDR10, leaving no headroom for higher refresh rates or deeper colour.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.