We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass push-fit elbow fitting with threaded end

SMC

SMC KQ2L11-35AS Push-Fit Elbow Fitting

SKU CH-4NBH-7N8BT

Push-to-connect elbow joins 3/8 inch tube to 11/35 NPT threads for secure fluid routing

  • Push-to-connect design enables tool-free installation
  • Engineered seal helps prevent fluid or air leaks
  • Push-on hose fitting suits industrial and commercial systems
  • Connects 3/8 in tube OD to male NPT threads
  • SMC brand recognised for pneumatic component quality

Push-Fit Elbow for 3/8 in Tube OD

The SMC KQ2L11-35AS is a push-to-connect elbow fitting designed for 3/8 in tube outside diameter with a male NPT thread. It secures hoses in pneumatic or fluid systems without clamps, ferrules or crimps. The fitting suits maintenance engineers and OEM assemblers who need quick, tool-free installation in industrial environments.

Leak-Tight Seal Under Normal Pressure

The engineered push-on design creates a tight seal that contains leakage during standard air or fluid transfer. No clamping force or crimping tool is required, so assembly remains fast and repeatable. Normal operation stays quiet because there are no moving parts or vibration sources in the fitting itself.

No Clamps Ferrules or Crimps Needed

The push-to-connect mechanism eliminates the need for separate clamps, ferrules or crimp tools, reducing component count and installation time. This simplification supports efficient system builds and easier field repairs. The fitting arrives ready to use with no additional accessories or software required.

Highlights

  • Push-to-connect design enables tool-free installation
  • Engineered seal helps prevent fluid or air leaks
  • Push-on hose fitting suits industrial and commercial systems
  • Connects 3/8 in tube OD to male NPT threads
  • SMC brand recognised for pneumatic component quality

Specifications

BrandSMC

Questions about this item

How do you install the push-to-connect end onto the 11 mm tube without leaking?

Cut the tube square, deburr the edge, then push it straight into the fitting until it seats against the internal stop; the collet locks automatically and the O-ring seals without tools.

What maintenance does the 35 thread sealant need over time?

The pre-applied sealant on the male NPT thread is single-use; if the fitting is removed, clean the threads and apply fresh PTFE tape or pipe dope before reinstalling.

At what pressure does the collet grip on the 11 mm tube become the limiting factor?

The collet holds securely up to the fitting's rated working pressure; sustained pressure spikes beyond that rating can overcome the grip and eject the tube.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.