Simmtec, Inc
Simmtec, Inc 8GB DDR3L PC3L-12800 1600MHz 240-pin DIMM 1.35V for ASRock FM2A75 Pro4-M memory upgrade
An 8 GB DDR3L memory module running at 1600 MHz with 1.35 V for the ASRock FM2A75 Pro4-M motherboard
- 8GB capacity expands system memory for demanding tasks
- DDR3L 1.35V operation reduces power draw versus standard DDR3
- 1600MHz PC3L-12800 speed delivers responsive data throughput
- 240-pin DIMM form factor fits ASRock FM2A75 Pro4-M desktop motherboards
- Non-ECC 2Rx8 design ensures broad compatibility with consumer platforms
8GB DDR3L module for ASRock FM2A75 Pro4-M
This 8GB DDR3L DIMM is built to match the ASRock FM2A75 Pro4-M motherboard. It suits desktop and workstation owners who need a straight replacement or a single-stick capacity increase. The 240-pin form factor fits the board's standard DDR3 slots without adapters.
Low-voltage DDR3L at 1.35V
Operating at 1.35V, the DDR3L stick draws less power than standard 1.5V DDR3 while running at 1600MHz PC3L-12800 speeds. Lower voltage reduces heat output in the memory subsystem, helping keep system thermals manageable during typical workloads. Non-ECC, unbuffered design adds no extra latency or power overhead.
Single-stick upgrade leaves slots open
The module occupies one 240-pin DIMM socket, leaving remaining slots free for future expansion. No BIOS changes or voltage jumpers are required beyond the board's native DDR3L support. Buyers who want more storage, a different form factor, or registered ECC memory will need a different product class.
Highlights
- 8GB capacity expands system memory for demanding tasks
- DDR3L 1.35V operation reduces power draw versus standard DDR3
- 1600MHz PC3L-12800 speed delivers responsive data throughput
- 240-pin DIMM form factor fits ASRock FM2A75 Pro4-M desktop motherboards
- Non-ECC 2Rx8 design ensures broad compatibility with consumer platforms
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 240-pin DDR3L DIMM into the ASRock FM2A75 Pro4-M and what step is often missed?
Align the notch on the module with the slot key, press down firmly until both side clips snap shut, and verify the board detects 8 GB at 1600 MHz in BIOS.
What maintenance or replacement will this 8 GB DDR3L module need over time?
No scheduled maintenance is required; if errors appear, reseat the stick or test with a single module to isolate a faulty DIMM.
What limit appears first when the 1.35 V DDR3L memory runs under sustained load?
The JEDEC-rated 1600 MHz speed and 1.35 V voltage are the operating ceiling; exceeding them risks instability.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



