We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack rail kit, steel, 611mm long, tool-less design

Silverstone

Silverstone RMS05-22 35kg rack rail server accessory

SKU CH-MW4V-M5JV7 MPN RMS05-22

Tool-less steel rack rail kit supports 35 kg loads for 3U and 4U chassis up to 440 mm wide

  • TypeRack Rail
  • ColorSilver
  • SpecificationsMax. supported weight: 35kg Dimension: 611mm (W) x 38mm (H)
  • FeaturesTool-less design Maximum loading up to 77.16 pounds (35kg) S
  • Tool-less installation saves setup time
  • Supports 35 kg load for heavy servers
  • Fits 3U and 4U chassis up to 440 mm wide
  • Adjustable depth from 595 mm to 936 mm for cabinet flexibility
  • Ball-bearing slides give smooth, reliable extension

35kg Tool-less Rack Rail Kit

The Silverstone RMS05-22 is a steel sliding rail kit designed for mounting server chassis into standard rack cabinets. It features a tool-less design with spring clips for quick installation and ball-bearing slides for smooth operation. The rails support a maximum load of 35kg and are finished in silver.

Suits 3U and 4U Chassis Builders

This kit suits administrators installing 3U or 4U form factor chassis up to 440mm wide into racks with mounting hole distances between 595mm and 936mm. It is not for users needing to mount 1U or 2U units, chassis wider than 440mm, or equipment exceeding the 35kg weight limit.

Adjustable Depth 595 to 936mm

The single specification that decides fit is the adjustable rack mounting depth range of 595mm to 936mm. You must verify your cabinet's front-to-rear rail spacing falls within this window; otherwise the rails cannot be secured.

Highlights

  • Tool-less installation saves setup time
  • Supports 35 kg load for heavy servers
  • Fits 3U and 4U chassis up to 440 mm wide
  • Adjustable depth from 595 mm to 936 mm for cabinet flexibility
  • Ball-bearing slides give smooth, reliable extension

Specifications

BrandSilverStone
ModelRMS05-22
TypeRack Rail
ColorSilver
SpecificationsMax. supported weight: 35kg
Dimension: 611mm (W) x 38mm (H) x 12.5mm (D)
Net Weight: 2.8kg
Extra: RMS series rail slide compatibility
Rack Cabinet mounting hole distance (Min.~Max.): 595 ~936±3 mm
FeaturesTool-less design
Maximum loading up to 77.16 pounds (35kg)
Supports 3U and 4U form factor
Supports 440mm wide chassis
Shipping weight3.18 kg
Package size737 × 102 × 76 mm

Questions about this item

How do I know if the 595 mm to 936 mm mounting range fits my rack cabinet?

Measure the distance between the front and rear mounting flanges of your cabinet; if it falls between 595 mm and 936 mm the rails will bolt in.

What does the 35 kg load rating mean when the rails are fully extended?

The ball-bearing slides are tested to carry a 35 kg chassis at full extension without sagging or binding.

Does the tool-less design work with both square-hole and round-hole rack posts?

The spring-clip brackets snap into standard square-hole posts; round-hole posts require screws (not supplied).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.