We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic IEC miniature circuit breaker, single toggle, DIN rail mount, screw clamp terminals, 6 A 1-pole

Schneider Electric

Schneider Electric M9F43106 C60BP 6A 1-pole load center

SKU CH-P00S-SW8B0

A 6 A single-pole miniature circuit breaker with D-curve thermal-magnetic trip, 14 kA interrupting rating at 120/240 V AC, and DIN-rail mounting

  • Thermal magnetic trip protects branch circuits reliably
  • 14 kA interrupting rating handles high fault currents
  • 6 A D-curve rating suits inductive load inrush
  • DIN rail mounting fits standard panel layouts
  • Screw clamp terminals accept 18 to 8 AWG wire

Schneider Electric M9F43106 6A DIN-rail breaker

The Schneider Electric M9F43106 is a single-pole miniature circuit breaker rated at 6 amps with a D-curve thermal-magnetic trip. It mounts on standard DIN rail and provides branch-circuit protection for industrial control panels and machinery.

Verify rail space voltage and wire gauge

Confirm the enclosure has 18 mm of DIN-rail width available and that the system voltage does not exceed 240/415 V AC or 60 V DC. The screw-clamp terminals accept conductors from 18 AWG up to 8 AWG only.

Toggle actuator and screw-clamp terminals

The front-mounted toggle gives clear visual indication of the breaker state while the screw-clamp connections allow secure field wiring without specialised tools. No additional accessories are included in the package.

Highlights

  • Thermal magnetic trip protects branch circuits reliably
  • 14 kA interrupting rating handles high fault currents
  • 6 A D-curve rating suits inductive load inrush
  • DIN rail mounting fits standard panel layouts
  • Screw clamp terminals accept 18 to 8 AWG wire

Specifications

BrandSCHNEIDER ELECTRIC

Questions about this item

Does the Schneider Electric M9F43106 come with mounting hardware or DIN rail clips, or must they be purchased separately?

The breaker uses a DIN-rail mounting style and screw-clamp terminals for 18–8 AWG wire; mounting rail and clips are not included and must be sourced separately.

How do I decide between the D-curve 6 A version and other C60BP ratings for my branch-circuit application?

Choose the D-curve 6 A unit when protecting loads with high inrush currents such as transformers or motors; select a different C60BP amperage or curve only if the load profile and local code require it.

What does the 14 kA AIR rating mean when the breaker is installed in a 240 V panel?

At 120/240 V AC the breaker can safely interrupt up to 14 kA of prospective fault current, limiting let-through energy to protect downstream wiring and equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.