Hubbell Incorporated
Hubbell Incorporated GFCI Receptacle Commercial Self-Testing 15A 125V White 0.5hp
A commercial-grade GFCI receptacle with self-testing, tamper-resistant and weather-resistant construction for 15 A, 125 V circuits
- Self-testing GFCI monitors circuit integrity automatically
- Tamper-resistant shutters block foreign object insertion
- Weather-resistant construction suits damp or outdoor locations
- 15 A 125 V rating powers standard commercial loads
- 5 hp motor capacity handles small equipment startup
Commercial GFCI Receptacle
The Hubbell GFCI receptacle is a 15 A 125 V AC duplex outlet designed for commercial environments. It combines ground-fault protection with a decorator-style white finish and flush mounting. Self-testing capability checks the protection circuit automatically. A power indicator shows operational status at a glance.
Suited for code-required wet locations
This unit fits kitchens, bathrooms, garages and outdoor receptacles where tamper-resistant and weather-resistant construction are required. The 0.5 hp rating supports small motor loads such as disposal units. Installers needing surge suppression or a non-self-testing device should select a different model.
Self-testing ground-fault protection
Automatic self-testing verifies the GFCI function without user intervention, meeting modern electrical-code requirements for periodic verification. The reset action is automatic after a fault clears. This single feature determines whether the device satisfies the inspection standard for the intended installation.
Highlights
- Self-testing GFCI monitors circuit integrity automatically
- Tamper-resistant shutters block foreign object insertion
- Weather-resistant construction suits damp or outdoor locations
- 15 A 125 V rating powers standard commercial loads
- 5 hp motor capacity handles small equipment startup
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
How do I wire the modular terminals on this 15 A GFCI receptacle?
Strip each conductor to the gauge marked on the device, insert the hot, neutral and ground wires into the corresponding modular openings, then tighten the screws until the conductors cannot be pulled free.
Will the self-test function require any user maintenance or replacement parts?
The built-in self-test runs automatically; if the indicator shows a fault the entire receptacle must be replaced, as no internal components are serviceable.
At what load does the 0.5 hp motor rating limit continuous operation?
The 0.5 hp rating applies to motor loads up to that level; sustained current above 15 A on the 125 V circuit will trip the device.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



