We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 19-inch low-profile SATA cable, straight-to-right connectors, flexible rubber sleeve

SATACables

SATACables LP30SR483 SATA cable 1.58 ft

SKU CH-Y950-PC0X8

A 1.58 ft internal SATA cable with low-profile right-angle and straight connectors for tight spaces

  • Cable Length1.58 ft.
  • 19 inch low-profile right-angle connector fits tight spaces
  • SATA III 6.0 Gbps throughput handles modern SSD speeds
  • Backwards compatible with SATA 1.5 Gbps and 3.0 Gbps devices
  • Shielded cable with silver mesh blocks EMI and RFI interference
  • Flexible rubber sleeve improves airflow and simplifies cable routing

What this cable connects

The SATACables LP30SR483 is a straight-to-right-angle SATA cable measuring 1.58 ft. It links a motherboard host port to a Serial ATA hard drive, optical drive or other SATA device inside a PC, notebook or server. The low-profile right-angle connector saves space in tight drive bays.

SATA 6 Gbps practical ceiling

The cable supports the SATA 6.0 Gbps specification and is backwards compatible with 1.5 Gbps and 3.0 Gbps devices. Actual throughput will not exceed the slowest link in the chain — drive, controller or cable — so a SATA I drive will still run at 1.5 Gbps. The shielded, flexible sleeve resists EMI and vibration without stiffening the run.

Check connector orientation and length

Verify that your motherboard port and drive socket accept a straight plug on one end and a right-angle plug on the other. Confirm that 1.58 ft spans the distance between them without tension. The yellow low-profile housing fits most standard drive bays, but very shallow enclosures may still block the right-angle bend.

Highlights

  • 19 inch low-profile right-angle connector fits tight spaces
  • SATA III 6.0 Gbps throughput handles modern SSD speeds
  • Backwards compatible with SATA 1.5 Gbps and 3.0 Gbps devices
  • Shielded cable with silver mesh blocks EMI and RFI interference
  • Flexible rubber sleeve improves airflow and simplifies cable routing

Specifications

ModelLP30SR483
Cable Length1.58 ft.

Questions about this item

Should I pick the 1.58 ft cable or a longer run for my build?

The 1.58 ft length suits tight internal routing between a motherboard and a nearby drive. Choose a longer cable only if the drive bay sits farther from the SATA port.

What does the 6.0 Gbps rating deliver once the cable is installed?

It supports the full SATA III 6.0 Gbps link speed between host and device, so a modern SSD or HDD can run at its rated throughput without cable bottleneck.

Which SATA standard does this cable use and what speed does that cap at?

The cable meets the SATA 6.0 Gbps (SATA III) specification, capping the link at 6.0 Gbps while remaining backward compatible with 1.5 and 3.0 Gbps devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.