We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

sakose

sakose C6EB-20GRAY network ethernet cable Cat 6E 20 ft Gray

SKU CH-YJ22-KVBHZ

Cat 6 Enhanced cable rated at 550 MHz with RJ45 connectors on both ends for 10/100/1000 gigabit networks

  • Cat6E
  • Connector ARJ45
  • Connector BRJ45
  • Length20 ft.
  • ColorGray
  • ShieldedNo
  • Supports gigabit speeds up to 1000 Mbps with Cat 6E 550 MHz rating
  • Reliable 20 ft reach connects devices across rooms without signal loss
  • Durable PVC jacket protects 24 AWG conductors for long service life
  • TIA/EIA 568B.2 wiring ensures broad compatibility with routers and switches
  • Unshielded twisted-pair design keeps installation simple and cost-effective

Cat 6E 20 ft patch cable for Gigabit networks

This sakose C6EB-20GRAY cable is a Category 6 Enhanced patch cord built to the TIA/EIA 568B.2 standard. It uses a PVC jacket, 24 AWG conductors and four twisted pairs rated for 550 MHz bandwidth. The RJ45 connectors on both ends support 10, 100 and 1000 Mbps Ethernet speeds. It arrives new in a gray finish measuring 20 ft.

Suits fixed runs up to 20 ft where unshielded

Home and office users linking routers, switches, PCs or NAS boxes at Gigabit rates will find the length and performance adequate. Builders who need shielded construction for noisy environments or runs longer than 20 ft should look at other options. Installers requiring plenum-rated jackets or PoE certification beyond the basic specification must choose a different product.

550 MHz Category 6 Enhanced rating determines

The 550 MHz bandwidth specification is the single figure that defines the cable's capacity to carry Gigabit signals without errors over the full 20 ft. If your network gear demands higher frequencies or you plan to upgrade to multi-gigabit speeds, this rating becomes the limiting factor.

Highlights

  • Supports gigabit speeds up to 1000 Mbps with Cat 6E 550 MHz rating
  • Reliable 20 ft reach connects devices across rooms without signal loss
  • Durable PVC jacket protects 24 AWG conductors for long service life
  • TIA/EIA 568B.2 wiring ensures broad compatibility with routers and switches
  • Unshielded twisted-pair design keeps installation simple and cost-effective

Specifications

BrandSAKOSE
ModelC6EB-20GRAY
Cat6E
Connector ARJ45
Connector BRJ45
Length20 ft.
ColorGray
ShieldedNo
FeaturesCat 6 Enhanced 550MHz Patch Cable TIA/EIA 568B.2 PVC Jacket 24 AWG 4 Pairs Supports Gigabits 10/100/1000

Questions about this item

Will the 24 AWG conductors or PVC jacket need replacement after years of routing through walls?

The 24 AWG copper pairs and PVC jacket are built for permanent installation; no scheduled replacement is required unless the cable is physically damaged.

At what point does the 550 MHz bandwidth limit throughput on a sustained 1000 Mbps link?

The 550 MHz rating exceeds the frequency needed for 1000 Mbps operation, so the cable does not become the bottleneck on a gigabit connection.

Does the unshielded 20 ft design run warmer or draw more power than a shielded alternative when carrying 1000 Mbps all day?

Passive copper cables generate no heat and consume no power; the unshielded 20 ft length behaves identically to a shielded version in thermal and electrical terms.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.