We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister USB 3.0 SATA PCI-E 1X to 16X Riser Card 6 Pin 60CM internal power cable

SKU CH-PC86-DHW2R

Connects a PCI-E 1X slot to a 16X riser card with a 60cm USB 3.0 cable and SATA 6-pin power

  • USB 3.0 link enables faster data transfer between riser and motherboard
  • 60 cm cable length gives flexible GPU placement inside the case
  • SATA power connector supplies reliable 6-pin power to the riser card
  • Five riser cards in one pack support multi-GPU mining rig builds

60 cm USB 3.0 PCI-E 1X to 16X Riser Kit

This kit contains five riser cards that convert a single PCI-E 1X slot into a 16X physical connector using a USB 3.0 cable. Each card draws auxiliary power through a 6-pin connector and includes a 60 cm internal power cable. The set is intended for internal builds that need multiple GPU attachments from limited motherboard lanes.

Not for builds without spare 6-pin power leads

Buyers who lack free 6-pin connectors on their power supply cannot use these risers without adapters that are not included. Systems that require shielded or fixed-length ribbon cables instead of flexible USB 3.0 links should look at alternative extender designs.

Highlights

  • USB 3.0 link enables faster data transfer between riser and motherboard
  • 60 cm cable length gives flexible GPU placement inside the case
  • SATA power connector supplies reliable 6-pin power to the riser card
  • Five riser cards in one pack support multi-GPU mining rig builds

Specifications

No published specifications for this item yet.

Questions about this item

What does the 16X width mean once the card is installed in a real machine?

The board provides a full mechanical 16X slot so any length of graphics card will fit, but the electrical link runs at 1X speed over the USB 3.0 cable.

What interface does the cable use and what does it cap in practice?

The extender uses a USB 3.0 link between the 1X edge connector and the 16X slot, so throughput is limited to the 1X lane rate even though the slot is 16X wide.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.