EN-Labs
EN-Labs 3110106PK 6-Pack PCIe 1X to 16X Riser Cable 60CM USB 3.0 SATA Power White
Six PCIe 1× to 16× riser cables with 60 cm USB 3.0 links, solid capacitors and SATA power for mining rigs
- TypeRiser Cable
- ColorWhite
- Length2FT
- Cable Length2 ft.
- FeaturesThe perfect solution for setting up Ethereum mining rigs, wh
- 60 cm USB 3.0 cable enables flexible GPU placement
- Four solid capacitors deliver stable power to each riser
- On-board SATA, Molex and 6-pin connectors reduce motherboard load
- 90-degree PCIe 1x bracket eases cable routing in tight cases
- Plug-and-play design works with 1x, 4x, 8x or 16x slots
Mining Riser Kit for GPU Expansion
This six-pack provides PCIe 1X to 16X riser cards with 60 cm USB 3.0 cables for spacing graphics cards away from the motherboard. Each adapter includes four solid capacitors and multiple voltage regulation components for stable power delivery. A surface-mounted fuse adds overcurrent protection to safeguard connected components. The white cables measure 2.36 feet in length.
Suited for open-air mining rigs
The 90-degree PCIe 1X bracket eases cable routing in small form factor cases while supporting 1X, 4X, 8X or 16X motherboard slots. Builders needing flexible GPU placement without driver installation will find this plug-and-play kit convenient. Those requiring longer cables or different power connector types should look at other options.
SATA, Molex 4-pin and 6-pin PCIe power inputs
This integrated PCB design draws auxiliary power directly from the supply, reducing load on the motherboard slot. The model number is 3110106. No other power interfaces are present on the board.
Highlights
- 60 cm USB 3.0 cable enables flexible GPU placement
- Four solid capacitors deliver stable power to each riser
- On-board SATA, Molex and 6-pin connectors reduce motherboard load
- 90-degree PCIe 1x bracket eases cable routing in tight cases
- Plug-and-play design works with 1x, 4x, 8x or 16x slots
Specifications
| Brand | EN-Labs |
|---|---|
| Model | 3110106PK |
| Type | Riser Cable |
| Color | White |
| Length | 2FT |
| Cable Length | 2 ft. |
| Features | The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PC |
Questions about this item
What slot spacing does the 1× PCIe card need on the motherboard?
The 1× adapter fits any PCIe x1, x4, x8 or x16 slot and exits at a 90 degree turn for tight cases.
Which power connectors must be attached to the riser board during installation?
Connect either a Molex 4‑pin, a SATA or a 6‑pin PCIe plug from the PSU directly to the board; using more than one at the same time can cause a short.
When should the onboard surface‑mounted fuse be checked or the board replaced?
If a GPU stops being detected or the system becomes unstable after a power spike, the fuse may have blown — swap the riser board to restore protection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
