We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister THD0924HE 24V 1.60A 92x92x38mm 4-wire internal power cable

SKU CH-AWF8-1YQEK

4-wire internal power cable for a 24 V, 1.60 A, 92 × 92 × 38 mm Delta THD0924HE server cooling fan

  • 4-wire PWM control for precise speed regulation
  • 24 V DC input matches server power rails
  • 92 mm square frame fits standard 9238 mount
  • 38 mm depth suits 1U chassis slots

Compatible 24V 4-wire power cable

This internal power cable is designed for the Delta THD0924HE 24V 1.60A server cooling fan. It suits technicians and system integrators who need a replacement or spare lead for 92mm by 92mm by 38mm units. The four-wire connector matches the fan's PWM control and tachometer signals. Builders using different fan models or voltage ratings should select an alternative cable.

Thermals noise and power draw

The cable itself generates no heat and produces no audible noise during operation. It transmits the 24V supply and 1.60A current rating required by the attached fan without adding measurable resistance. Power draw is determined entirely by the connected Delta THD0924HE cooler. No active cooling or additional power management is needed for the cable assembly.

Highlights

  • 4-wire PWM control for precise speed regulation
  • 24 V DC input matches server power rails
  • 92 mm square frame fits standard 9238 mount
  • 38 mm depth suits 1U chassis slots

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 4-wire cable to the Delta THD0924HE fan without reversing the PWM and tach pins?

Align the keyed 4-pin connector so the yellow PWM wire and blue tach wire match the fan header pinout; the shroud only seats one way, preventing a reversed fit that would leave the 24 V supply live but speed control dead.

When should I plan to replace the cable on a Delta THD0924HE running at 1.60 A continuous?

Insulate the 4-wire loom annually; if the PVC jacket shows cracking near the 92 mm fan housing or the connector pins discolour from 24 V arcing, swap the cable to avoid intermittent tach signals.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.