We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 600W fully modular PSU with 40mm fan, black finish

Ruth's sister

Ruth's sister 600W full modular internal power cable

SKU CH-W58P-9FJT8

Full-modular 600 W PSU with 88 % efficiency, 24-pin ATX 2.31, two 6-pin GPU and two SATA connectors, 4020 PWM fan, 94-264 V input, passive PFC

  • Full modular design simplifies cable routing
  • 600 W total output powers demanding workstations
  • 88 % high efficiency reduces wasted energy
  • 4020 PWM fan keeps temperatures low
  • ATX 12 V 2.31 compliant for broad compatibility

600W Full-Modular Flex PSU

This 600W full-modular flex form-factor power supply targets compact desktop, server and workstation builds that need a short-depth unit. It delivers 600W of continuous power through a 24-pin ATX connector, a 4-pin CPU connector, two 6-pin graphics connectors, four D-type connectors and two SATA ports. Passive PFC and 88% typical efficiency keep heat output low in tight 1U chassis.

Sustained-load behaviour

The unit is rated for 100% high-temperature ageing at 50°C and specifies a lifecycle exceeding 80K hours, indicating stable output during prolonged operation. A 4020 PWM fan adjusts speed to thermal load, while low output ripple noise and per-rail over-voltage and short-circuit protections maintain clean power under continuous demand. Efficiency remains at 88% across the 94-264V input range.

ATX 12V 2.31 interface limits

Compliance with Intel ATX 12V version 2.31 defines the connector pin-out and voltage-regulation tolerances this supply meets. The standard caps the 24-pin main connector, 4-pin CPU connector and peripheral connectors at the voltages and current limits specified in that revision. Builds requiring newer 12VHPWR or higher per-rail current limits fall outside this specification.

Highlights

  • Full modular design simplifies cable routing
  • 600 W total output powers demanding workstations
  • 88 % high efficiency reduces wasted energy
  • 4020 PWM fan keeps temperatures low
  • ATX 12 V 2.31 compliant for broad compatibility

Specifications

No published specifications for this item yet.

Questions about this item

How loud and hot does the 4020 PWM fan run when the 600W unit operates continuously?

The 4020 PWM fan is designed for low output ripple noise and high efficiency at 88%, with a life cycle exceeding 80K hours and 100% high temperature aging test at 50°C.

Which existing cables or connectors must I already have to use this fully modular 24-pin PSU?

You will need to connect the supplied modular cables: 24-pin motherboard, 4-pin CPU, two 6-pin PCIe for graphics, four D-type and two SATA peripheral connectors.

Will the passive PFC design and 94-264V input work reliably with an older ATX 2.31 motherboard?

Yes, it follows Intel ATX 12V version 2.31, supports 94-264V input, and provides over-voltage and short-circuit protection on every output rail.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.