We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with small white connector for Delta 9733 blower

Ruth's sister

Ruth's sister internal power cable for Delta BFB1012EH PWM blower 1U 2U server

SKU CH-A2DV-RD14C

Powers Delta BFB1012EH PWM blower fans in 1U and 2U servers

  • Powers the Delta BFB1012EH PWM blower in 1U and 2U servers
  • Dedicated cable for the 9733 turbofan measuring 97×97×33 mm
  • Supplies 12 V at 2.94 A to match the fan specification
  • New internal power cable built for the Delta BFB1012EH model

Dedicated cable for Delta BFB1012EH PWM blower

This internal power cable is built for the Delta BFB1012EH PWM blower used in 1U and 2U servers. It connects the 12 V 2.94 A turbofan directly to the system power supply. The lead matches the 9733 fan’s pin-out and 97 mm frame dimensions. It suits technicians who need a factory-correct replacement without splicing.

Fits 97 × 97 × 33 mm fan footprint

The cable routes inside the tight 33 mm depth of the 9.7 cm blower housing, leaving adjacent slots clear for other components. It draws 12 V from the server backplane so no extra power adapter is required. Builders who need a different voltage or a non-PWM connector will need a different harness.

Highlights

  • Powers the Delta BFB1012EH PWM blower in 1U and 2U servers
  • Dedicated cable for the 9733 turbofan measuring 97×97×33 mm
  • Supplies 12 V at 2.94 A to match the fan specification
  • New internal power cable built for the Delta BFB1012EH model

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum current draw of the Delta BFB1012EH blower this cable supports?

The cable is designed for the Delta BFB1012EH PWM blower rated at 12V and 2.94A.

Does the cable add any audible noise or heat when the blower runs continuously in a 1U or 2U server?

It is a passive power cable, so it adds no noise; heat is limited to normal resistive loss at 2.94A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.