We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OwlTree 2-Pack EPS12V CPU 8-Pin Female to ATX 8-Pin + 4-Pin Male Extension Cable 10.6in

SKU CH-R94X-0TGBY

A 10.6-inch braided Y-splitter extends an EPS 8-pin CPU connector to both an ATX 8-pin (4+4) and a 4-pin motherboard socket using 18 AWG tinned copper wire

  • TypeExtension Cable
  • ColorBlack
  • Length< 1"
  • Cable Length6 in.
  • SpeedBraided
  • Specifications782896551018, power supply extension cable, Black, 0.11 kilo
  • Reach 8+4 pin CPU sockets with 10.6 inch Y-splitter extension
  • 18 AWG tinned copper conductors carry CPU current safely
  • Braided sleeving protects wires inside the case
  • Two cables included for dual builds or spares
  • UL 1007 rated insulation meets safety requirements

What this cable does and who needs it

This OwlTree two-pack adapts a single EPS 12 V 8-pin female connector into both an ATX 12 V 8-pin (4+4 detachable) male and an ATX 12 V 4-pin male. It suits builders whose motherboard requires 8+4 pin CPU power while the power supply only provides one 8-pin EPS lead. The 10.6 in length keeps routing tidy inside compact cases.

Behaviour under sustained load

UL1007 18 AWG conductors use 34 strands of 0.178 mm tinned copper each, reducing resistance during continuous CPU draw. Braided sleeving protects the insulation from abrasion and helps dissipate heat along the full 27 cm run. The Y-splitter design maintains stable delivery to both motherboard headers simultaneously.

Limits of the EPS/ATX interface

This adapter only works with motherboard CPU sockets; plugging it into a PCIe graphics-card connector will cause damage. It cannot convert voltage or add current capacity beyond what the single EPS source supplies. Builders needing independent 8-pin and 4-pin feeds from separate PSU rails must use dedicated cables instead.

Highlights

  • Reach 8+4 pin CPU sockets with 10.6 inch Y-splitter extension
  • 18 AWG tinned copper conductors carry CPU current safely
  • Braided sleeving protects wires inside the case
  • Two cables included for dual builds or spares
  • UL 1007 rated insulation meets safety requirements

Specifications

BrandOwlTree
Model782896551018
TypeExtension Cable
ColorBlack
Length< 1"
Cable Length6 in.
SpeedBraided
Specifications782896551018, power supply extension cable, Black, 0.11 kilograms, OwlTree
Sports Team1 Piece
Connector A8 Pin Eps, 8 Pin (4+4) Atx, 4 Pin Atx
Connector B8 Pin Eps, 8 Pin (4+4) Atx, 4 Pin Atx
Connector Detailpower supply extension cable
Terminal GenderFemale to Female
ShieldingBraided
ConstructionElectrical Wire Insulation
Refresh Rate10.6 inches
Featurespower supply extension cable, Black, OwlTree, 782896551018
DisclaimerUL

Questions about this item

Does the 18 AWG wire run warm when the CPU draws full power all day?

The 18 AWG conductors with 34 strands of 0.178 mm tinned copper are rated for the current a CPU 8-pin socket can deliver, so they stay cool under continuous load.

My power supply only has an 8-pin EPS connector — will this cable plug straight in?

Yes, the female EPS 8-pin end mates with any standard PSU EPS cable, while the male 8-pin (4+4) and 4-pin ends fit motherboards with 8-pin, 4-pin or combined 8+4-pin CPU power sockets.

Can I keep my older motherboard that only has a 4-pin CPU power header?

The splitter includes a dedicated 4-pin ATX 12V male connector alongside the 8-pin (4+4) male, so it works with legacy 4-pin headers as well as modern 8-pin or 8+4-pin layouts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.