We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white plastic fiber connector with metal V-groove, approx 40x0.2mm

Ruth's sister

Ruth's sister Fast Connector Fiber Quick Connector Optical Fiber Mechanical Splices internal power cable

SKU CH-FRQC-4EKPJ

Mechanical splice connects 0.25 mm and 0.9 mm fibres with a metal V-groove for precise alignment and CE-certified reliability

  • Fast connector speeds up FTTH and repair jobs with simple operation
  • Metal V-groove aligns 0.25mm and 0.9mm fibres for high butt precision
  • Good sealing keeps matching fluid in place for strong weather resistance
  • CE certified adapter meets declared safety requirements
  • Compact ABS body measures 40 x 0.2 mm for tight internal routing

Optical fibre quick connector

This mechanical splice joins 0.25 mm and 0.9 mm fibres without fusion equipment. It is aimed at installers repairing FTTH links or building new drops in the field. The CE marked adapter uses a metal V groove to align cores and index matching fluid to minimise loss. No polishing or power tools are required for a permanent joint.

Tool free field termination

The connector accepts both common fibre diameters so one part covers repair and new build scenarios. Its ABS housing snaps shut around the prepared fibres removing the need for a separate cradle or heat shrink sleeve. Installers save the weight and cost of a fusion splicer while still achieving low insertion loss on single mode or multimode cable.

Passive low loss joint

The splice introduces no active components so it adds no power draw or electromagnetic noise to the link. Sealed construction keeps the matching fluid stable across temperature swings and outdoor exposure. Long term reliability comes from the fixed V groove geometry rather than moving parts that can wear.

Highlights

  • Fast connector speeds up FTTH and repair jobs with simple operation
  • Metal V-groove aligns 0.25mm and 0.9mm fibres for high butt precision
  • Good sealing keeps matching fluid in place for strong weather resistance
  • CE certified adapter meets declared safety requirements
  • Compact ABS body measures 40 x 0.2 mm for tight internal routing

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.25 mm and 0.9 mm fiber combinations hold alignment after repeated thermal cycles?

The metal V-groove design keeps butt precision high across temperature swings, and the CE-certified ABS housing resists weathering so the seal stays intact.

Does the connector generate noticeable heat or require extra power during continuous FTTH operation?

It is a passive mechanical splice with no active electronics, so it produces no heat and draws no power once installed.

What tools or consumables are needed before I can terminate a fiber with this connector?

You only need a standard fiber cleaver and stripper for 0.25 mm or 0.9 mm fiber; the connector includes its own index-matching fluid and requires no epoxy or polishing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.