We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green ESP32 adapter board with 2.54mm pitch pins and power cable

Ruth's sister

Ruth's sister ESP32 Adapter Board 2.54mm internal power cable

SKU CH-BHB8-5FT6B

ESP32 adapter board with 2.54 mm pitch for Wi-Fi and Bluetooth IoT modules

  • ESP32 module supports Wi-Fi and BLE connectivity
  • Adapter board uses 2.54 mm pitch for breadboard compatibility
  • 32-bit dual-core processor handles IoT workloads
  • Internal power cable simplifies module integration

ESP32 adapter board for IoT development

This ESP32 adapter board provides a 2.54 mm pitch interface for the ESP-WROOM-32 Wi-Fi and BLE module. It suits makers and engineers building wireless IoT prototypes or embedded projects that need a compact development platform. The board breaks out the module pins for easy breadboard or perfboard integration. Buyers needing a different pin spacing or an on-board USB-to-serial converter should look elsewhere.

Low thermal load with minimal power draw

The ESP32 module runs cool during typical Wi-Fi and Bluetooth operations, so the small adapter board does not require active cooling. Current consumption stays modest in normal use, allowing power from a standard USB port or small regulator. No fan or heatsink is needed, keeping the assembly silent and compact for enclosed projects.

Highlights

  • ESP32 module supports Wi-Fi and BLE connectivity
  • Adapter board uses 2.54 mm pitch for breadboard compatibility
  • 32-bit dual-core processor handles IoT workloads
  • Internal power cable simplifies module integration

Specifications

No published specifications for this item yet.

Questions about this item

How do I solder the 2.54 mm pitch pins on the ESP32 adapter board?

Align the board with the ESP-WROOM-32 module pins, then solder each of the 32 pins individually using a fine tip iron to avoid bridging the 2.54 mm spacing.

What maintenance will the ESP-WROOM-32 module and adapter board need over time?

Inspect the 32 solder joints for cracks after thermal cycling and reseat the module if contact resistance rises; no scheduled replacement is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.