EN-Labs
EN-Labs LP424TX425CM Molex to 4-Pin Fan Power Splitter Cable 10 inch Black Sleeved 12V
Connects four 3-pin or 4-pin fans to a single Molex power connector with a 10 inch black-sleeved cable
- Typefan power splitter cable
- ColorBlack
- Length10 inch / 25CM
- Cable Length10 in.
- SpecificationsName: Black Sleeved 4pin IDE Molex to four 3Pin/4Pin Fan pow
- Connector AMolex IDE 4pin
- Powers four fans from one Molex connector
- Delivers 12 V DC power to each fan
- Black sleeved cable resists abrasion inside the case
- 10 inch length fits compact builds cleanly
- Simple power-only adapter without PWM speed control
Molex-to-Fan Splitter for Four Devices
This EN-Labs cable splits one 4-pin Molex connector from a power supply into four 3-pin or 4-pin fan headers. It is built for PC builders who need to run multiple case or CPU cooler fans from a single PSU lead. The 10 inch length suits compact routing inside standard tower chassis.
Black Sleeved Cable with Male Pin Layout
The assembly uses a black sleeved jacket over a 25 cm run and terminates in five connectors total. Connector A is a 4-pin Molex IDE plug with two male pins; each of the four fan headers is a 4-pin housing fitted with two male tip pins. All connections are power-only, so fan speed reporting and PWM control signals are not passed through.
12 V Fixed Output with No Speed Control
The adapter delivers a constant 12 V DC supply to every attached fan, meaning connected fans will run at full voltage continuously. Because the cable lacks PWM or voltage regulation wires, motherboard fan curves and software speed profiles have no effect. Builders who require variable fan speeds should use motherboard headers or a dedicated fan controller instead.
Highlights
- Powers four fans from one Molex connector
- Delivers 12 V DC power to each fan
- Black sleeved cable resists abrasion inside the case
- 10 inch length fits compact builds cleanly
- Simple power-only adapter without PWM speed control
Specifications
| Brand | EN-Lab |
|---|---|
| Model | LP424TX425CM |
| Type | fan power splitter cable |
| Color | Black |
| Length | 10 inch / 25CM |
| Cable Length | 10 in. |
| Specifications | Name: Black Sleeved 4pin IDE Molex to four 3Pin/4Pin Fan power adapter cable IDE : 2pin Male Fan 4Pin connector: 2pin Male tips Material: Black Sleeved Output voltage: 12V Length: Approx. 10 inch / 25cm Note: Just power adapter cable get power from PSU,It doesn't support PWM fan speed controlling |
| Connector A | Molex IDE 4pin |
| Connector B | 4 x 4pin fan male (2pin tips) |
| Connector Number | 5 |
| Features | This EN-Labs LP424TX425CM power splitter cable is intended for connection of 4 ports 4-Pin PWM device (CPU cooler, case fan...) to a PSU power connector (4-Pin Molex). Black Sleeved 4pin IDE Molex to four 3Pin/4Pin cooler case / PWM Fan power splitter adapter cable It is usually used for converting PC PSU IDE molex 4pin to four 3Pin/4Pin fan connector |
Questions about this item
Does the Molex-to-4-pin splitter deliver full 12 V to every fan port?
Yes, the cable provides 12 V DC output only, so each of the four fan connectors receives the same 12 V rail from the PSU Molex source.
How much clearance does the 25 cm sleeved cable need behind the motherboard tray?
The total length is 10 inch or 25 cm, so allow at least that much free space from the PSU Molex connector to the furthest fan header.
Why do the fan connectors have only two pins inside each 4-pin housing?
The splitter is a power-only adapter; the two pins carry 12 V and ground, so PWM speed control signals are not passed through.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
