We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DC coupler with cable and battery-shaped connector

Ruth's sister

Ruth's sister DCC8 DC Coupler DMW-BLC12 BLC12PP internal power cable

SKU CH-776K-H4FTK

A DC coupler that replaces the DMW-BLC12 battery to run Panasonic Lumix cameras from external power

  • Continuous power for Panasonic Lumix FZ200, G6, G5, G80, G85, G5K, GH2K, GH2S
  • Replaces DMW-BLC12 battery pack for direct AC operation
  • DCC8 coupler design enables plug-in switching without interruption
  • Internal cable suits studio or long-duration shooting setups

Compatible Panasonic Lumix power coupler

This DCC8 DC coupler replaces the DMW-BLC12 battery pack for Panasonic Lumix cameras including the FZ200, G5, G6, G80, G85, G5K, GH2K and GH2S models. It connects directly to an external power source for continuous operation without battery changes. The unit plugs into the camera battery compartment and accepts a standard DC input.

Thermals noise and power draw

The passive coupler generates no audible noise and adds negligible heat inside the camera body during normal use. Power consumption matches the camera's own draw, which varies by model and shooting mode. No active cooling or fan is required, and the device does not impose additional thermal load beyond the camera's normal operation.

Highlights

  • Continuous power for Panasonic Lumix FZ200, G6, G5, G80, G85, G5K, GH2K, GH2S
  • Replaces DMW-BLC12 battery pack for direct AC operation
  • DCC8 coupler design enables plug-in switching without interruption
  • Internal cable suits studio or long-duration shooting setups

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the DCC8 DC coupler into my Panasonic Lumix DMC-FZ200 battery compartment?

Open the battery door, align the DCC8 coupler's contacts with the DMW-BLC12 slot, press firmly until it clicks, then route the DC cable through the compartment's side notch before closing the door.

When should I replace the DCC8 DC coupler for my Panasonic Lumix G85?

Replace the DCC8 coupler if the DC plug becomes loose, the cable insulation cracks, or the camera shows intermittent power loss during extended shooting sessions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.