We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic DC-to-USB converter module with Type-C and USB-A ports on 80cm cable

Ruth's sister

Ruth's sister DC 10V-30V to USB 5V3A Type-C 5V3A 80cm internal power cable

SKU CH-F5DP-EVC48

Converts 10V-30V DC input to USB 5V3A and Type-C 5V3A outputs with QC3.0 fast charging in an 80cm internal cable

  • Converts 10-30 V DC input to USB 5 V 3 A output
  • Type-C port delivers 5 V 3 A with QC3.0 fast charging
  • Built-in short-circuit and over-temperature protection for safe operation
  • Compact module with 80 cm cable simplifies internal installation
  • USB port also supplies 9 V 2 A and 12 V 1.5 A for versatile charging

DC 10V-30V to USB-C step-down converter

This module accepts a 10V to 30V DC source and delivers 5V 3A through both a USB-A and a USB-C port. It is intended for builders adding fast charging to custom enclosures, embedded systems or vehicle projects where only a higher DC rail is available. The 80cm lead allows flexible routing inside a chassis.

Plug-in installation with basic protection

The cable terminates in bare input wires for direct connection to a 10V-30V supply; no soldering to the board is required. Built-in short-circuit and over-temperature safeguards shut the converter down if a fault occurs. The USB-C port implements QC3.0 only and will not negotiate PD, so devices expecting Power Delivery fall back to standard 5V charging.

Verify source voltage

Confirm your power rail stays within the 10V to 30V window under load; voltages outside this range can damage the module. Ensure the target device accepts QC3.0 on USB-C or standard 5V 3A on USB-A, because PD is not supported. The 80cm length suits most internal runs but measure your routing path to be certain.

Highlights

  • Converts 10-30 V DC input to USB 5 V 3 A output
  • Type-C port delivers 5 V 3 A with QC3.0 fast charging
  • Built-in short-circuit and over-temperature protection for safe operation
  • Compact module with 80 cm cable simplifies internal installation
  • USB port also supplies 9 V 2 A and 12 V 1.5 A for versatile charging

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the DC 10V-30V to USB 5V3A Type-C cable is working correctly after installation?

Connect a compatible device to the USB or Type-C port and verify it charges at the rated output of 5V3A, 9V2A, or 12V1.5A; the built-in short-circuit and over-temperature protections will activate automatically if a fault occurs.

What components are included in the package and what must I source separately?

The package includes one DC-DC step-down USB charging converter module with an 80cm cable; you must provide a DC power source within the 10V-30V input range and the device you wish to charge.

Which output version should I choose between the USB and Type-C ports for my device?

Use the USB port for QC3.0 fast charging at 5V3A, 9V2A, or 12V1.5A; use the Type-C port for 5V3A output with QC3.0 support, noting it does not support PD charging.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.