We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black six-foot internal power cable with C14 female and C19 male connectors, 1.5 mm² conductors

Ruth's sister

Ruth's sister C14 to C19 3×1.5mm 6ft 16A 250V internal power cable

SKU CH-JCTN-A6SZN

Connects a C14 inlet to a C19 outlet with 1.5 mm² conductors rated 16 A at 250 V

  • C14 female to C19 male connects PDU to server equipment
  • 3 × 1.5 mm² conductors carry 16 A at 250 V
  • 6 ft length fits standard rack and cabinet spacing
  • IEC 320 C14 and C19 ends lock securely into matching inlets

Internal C14 to C19 power cord

This 6 ft internal power cable connects a C14 female inlet to a C19 male plug using three 1.5 mm conductors. It is rated for 16 A at 250 V and follows the IEC 320 standard. The cord suits server racks, PDUs or workstations that need a C19 equipment connection.

Replaces shorter or lower-rated C14 leads

The extension adds reach between a C14 source and a C19 device while keeping the 16 A capacity. It is not for equipment that draws more than 16 A or requires a different connector type. Builders needing a C20 inlet or higher current should choose another cable.

Highlights

  • C14 female to C19 male connects PDU to server equipment
  • 3 × 1.5 mm² conductors carry 16 A at 250 V
  • 6 ft length fits standard rack and cabinet spacing
  • IEC 320 C14 and C19 ends lock securely into matching inlets

Specifications

No published specifications for this item yet.

Questions about this item

Will the IEC320 C14 and C19 connectors on this cable clear the rear panel cut-out on a standard 1U PDU?

The IEC320 C14 female and C19 male plugs are standard chassis-mount sizes; measure your panel opening against the connector bodies before routing the 6 ft cord.

What is the correct orientation when plugging the C14 female end into a PDU inlet?

Align the keyway on the C14 female with the notch on the C14 inlet, push straight in until the latch clicks, then secure the C19 male into the device outlet the same way.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.