We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small FPV camera with 3.6 mm lens and 32-channel 600 mW transmitter

Ruth's sister

Ruth's sister 3.6 mm Camera 600 mW 32-Channel Transmitter internal power cable

SKU CH-8XW9-WZXBM

A 3.6 mm FPV camera with 700 TVL resolution and a 600 mW 32-channel transmitter

  • Easy FPV setup with simple installation
  • Clear 700 TVL video from 3.6 mm lens
  • Strong 600 mW signal reaches far
  • 32 channels avoid frequency conflicts

3.6 mm FPV Camera & Transmitter

This 3.6 mm FPV camera pairs with a 600 mW 32-channel transmitter for first-person-view flying. It delivers 700 TVL horizontal resolution and is built for pilots who want a compact all-in-one video solution. The unit suits quadcopters and fixed-wing models that need a lightweight camera and transmitter combination. It is not intended for users who require HD digital video or recording capability.

Internal Power Cable Installation

The internal power cable connects the camera-transmitter unit to the flight battery or power distribution board. Solder or crimp the leads securely and insulate every joint to prevent shorts. A loose connection or reversed polarity will cause video loss or permanent damage. Route the cable away from motor wires and propellers to avoid vibration fatigue and interference.

Highlights

  • Easy FPV setup with simple installation
  • Clear 700 TVL video from 3.6 mm lens
  • Strong 600 mW signal reaches far
  • 32 channels avoid frequency conflicts

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 700 TVL 3.6 mm camera is transmitting clearly after installation?

Power the system and check the video feed on your FPV monitor or goggles; a sharp, stable picture with no static on any of the 32 channels confirms the 600 mW transmitter and camera are working together.

What items are included and what must I supply separately?

The package contains the 3.6 mm FPV camera and the 600 mW 32-channel transmitter; you will need to provide a compatible power source, video receiver, antenna and any mounting hardware for your airframe.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.