We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small PS2 male to USB A female adapters, PVC and metal, approx 20x15x9mm

Ruth's sister

Ruth's sister 2-Piece PS2 Male to USB A Female Adapter Internal Power Cable

SKU CH-WXQA-MYA3V

Two PS/2 male to USB-A female adapters connect legacy keyboards or mice to USB ports, measuring 1.97x0.59x0.35in and weighing 20g

  • Add legacy PS/2 mouse or keyboard via USB
  • Two adapters included for dual device support
  • Compact 20x15x9 mm design fits tight cases
  • Driver-free installation works immediately after reboot
  • CE certified PVC and metal construction

Two PS2 to USB adapters included

This pair of internal power cables converts a PS2 male connector to a USB A female port. Each adapter measures approximately 1.97 by 0.59 by 0.35 inches and weighs 20 grams. They are built from PVC and metal with CE certification. The set is intended for users who need to connect legacy PS2 keyboards or mice to a USB header.

Passive design draws no external power

No external power source is required for operation. The adapters function as simple passive converters between the PS2 and USB interfaces. Installation is straightforward with no software drivers needed. Hot plugging is not supported so the system must be powered off before connecting the adapter and peripherals.

Works only with keyboards and mice

This adapter cannot connect other USB devices such as storage drives or hubs. Compatibility varies by motherboard and it will not function on every platform. Buyers who need to connect non-input USB devices or require guaranteed compatibility across all boards should look for a different solution.

Highlights

  • Add legacy PS/2 mouse or keyboard via USB
  • Two adapters included for dual device support
  • Compact 20x15x9 mm design fits tight cases
  • Driver-free installation works immediately after reboot
  • CE certified PVC and metal construction

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the PS2 male to USB A female adapter inside my case and what step do people miss?

Power off the PC, connect the PS2 male end to the motherboard PS2 port, attach the USB device to the female port, then power on; hot plugging is not supported so the adapter must be seated before boot.

What maintenance or replacement will the adapter need over time?

No scheduled maintenance is required; the PVC and metal construction is passive, so only physical damage or port wear would prompt a replacement.

What limit appears first when the adapter is used continuously?

The adapter only supports mouse or keyboard devices and does not work on all motherboards; other USB peripherals will not function through it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.