We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 10pcs 5.5x2.1mm 12V DC Power Pigtail internal power cable

SKU CH-679M-1W2AC

Pack of ten 5.5×2.1 mm male plug pigtails for 12 V DC CCTV camera power connections

  • 10-piece pack keeps multiple cameras powered
  • 5 x 2.1 mm plug fits standard 12 V DC jacks
  • Male connector enables direct camera hook-up
  • Pre-tinned pigtail ends simplify solder-free installation

10-piece 12 V DC power pigtail set

This pack contains ten male plug cables with a 5.5 x 2.1 mm barrel connector rated for 12 V DC. They are intended for internal wiring of CCTV security cameras and similar low-voltage devices. Each cable provides a simple pigtail termination for direct soldering or screw-terminal connection. The set suits installers needing multiple identical leads for a single project.

Passive cables produce no heat or noise

These cables have no active components, so they generate no heat and operate silently. Power draw depends entirely on the connected camera or device, not on the cable itself. The 5.5 mm by 2.1 mm plug is a standard size for 12 V DC equipment. They are not suitable for higher-voltage mains wiring or data transmission.

Highlights

  • 10-piece pack keeps multiple cameras powered
  • 5 x 2.1 mm plug fits standard 12 V DC jacks
  • Male connector enables direct camera hook-up
  • Pre-tinned pigtail ends simplify solder-free installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 5.5 x 2.1 mm male plug to my 12V CCTV camera?

Insert the 5.5 mm outer and 2.1 mm inner pins firmly into the camera's matching DC jack; the step often missed is verifying centre-positive polarity before powering on.

When should I replace these pigtail cables in a permanent installation?

Replace any cable if the jacket shows cracking, the plug feels loose in the jack, or voltage drop exceeds normal levels for the 12 V supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.