Rocstor
Rocstor Y10C266B1 computer power adapter cord
A 3-foot HDMI to DVI-D male-to-male cable supporting up to 1920 x 1200 resolution
- HDMI to DVI-D link connects modern and legacy displays
- Male-to-male plugs fit directly without extra adapters
- 3 ft cable keeps desk runs tidy
- 1920 x 1200 support delivers sharp digital video
- Black finish blends with standard equipment
HDMI to DVI-D cable
The Rocstor Y10C266B1 is a 3-foot male-to-male cable that connects an HDMI source to a DVI-D display. It supports video resolutions up to 1920 x 1200 and comes in a black finish. The cord carries digital video only and does not transmit audio signals. It is intended for straightforward PC-to-monitor or laptop-to-projector links.
Desktop users needing a short digital video link
This cable suits builders who want a direct HDMI-to-DVI connection without an extra adapter. It is not for users who require audio over the same cable or who need to run resolutions above 1920 x 1200. Buyers with DisplayPort-only or VGA-only ports should look at a different cable type. The fixed three-foot length also limits placement flexibility in larger setups.
Maximum supported resolution 1920 x 1200
The single specification that decides fit is the 1920 x 1200 resolution ceiling. If the display or source operates at that resolution or lower, the cable will handle the signal. Any requirement beyond that figure means this cable cannot meet the need.
Highlights
- HDMI to DVI-D link connects modern and legacy displays
- Male-to-male plugs fit directly without extra adapters
- 3 ft cable keeps desk runs tidy
- 1920 x 1200 support delivers sharp digital video
- Black finish blends with standard equipment
Specifications
No published specifications for this item yet.
Questions about this item
Does the 3 ft length add any heat or power draw to my setup?
The cable is passive and adds no measurable heat or power consumption regardless of how long it runs.
What ports must my devices already have for this cable to work?
You need an HDMI output on the source and a DVI-D input on the display, both female.
Will this cable drive a 1920 x 1200 monitor from an older DVI-D graphics card?
Yes, it supports up to 1920 x 1200 resolution over the HDMI-to-DVI-D link.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



