We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black HDMI cable with male connectors on both ends, thirty feet long

Rocstor

Rocstor Y10C229-B1 30 ft HDMI 2.0 cable

SKU CH-YWQQ-ERH97 MPN Y10C229-B1

A 30 ft HDMI 2.0 cable carrying 4K 60 Hz video at 2.25 GB/s with shielded 28 AWG conductors

  • TypeHDMI
  • ColorBlack
  • Length30 ft.
  • Cable Length30 ft.
  • Connector Number1
  • Connect From1 x HDMI 2.0
  • 30 ft length connects distant displays without signal loss
  • HDMI 2.0 supports 4K at 60 Hz for smooth video
  • 25 GB/s bandwidth carries high-resolution audio and video
  • 28 AWG conductors with shielding reduce interference
  • Male-to-male connectors plug directly into source and display

30 ft HDMI 2.0 cable for 4K 60 Hz displays

This Rocstor cable carries digital audio and video between HDMI 2.0 sources and sinks over a 30 ft run. The 28 AWG conductors and shielding support a 2.25 GB/s data rate suitable for 4K resolution at 60 Hz. Male connectors at both ends plug directly into standard HDMI ports. It is a passive copper link for fixed installations.

Home cinema and office users with equipment spaced

The length suits projectors mounted on ceilings or screens positioned across a room from the source device. Installers who need longer runs or higher bandwidth for 8K signals should look at active or fibre-based alternatives. Buyers requiring angled or locking connectors will not find them here. The single cable covers one source-to-display path.

2.25 GB/s bandwidth defines the 4K 60 Hz limit

This speed rating is the specification that determines whether the cable matches the required video mode. It handles 4K at 60 Hz but does not meet the bandwidth needed for 8K or high-refresh-rate 4K formats. Verify that the source and display both operate within this throughput before purchasing.

Highlights

  • 30 ft length connects distant displays without signal loss
  • HDMI 2.0 supports 4K at 60 Hz for smooth video
  • 25 GB/s bandwidth carries high-resolution audio and video
  • 28 AWG conductors with shielding reduce interference
  • Male-to-male connectors plug directly into source and display

Specifications

BrandRocstor
TypeHDMI
ColorBlack
Length30 ft.
Cable Length30 ft.
Connector Number1
Connect From1 x HDMI 2.0
Connect To1 x HDMI 2.0
Connector DetailHDMI Male Digital Audio/Video 1 x HDMI Male HDMI 2.0 Digital Audio/Video
Speed2.25 GB/s
ShieldingYes
Conductor28 AWG
Shipping weight0.85 kg
Package size267 × 241 × 51 mm

Questions about this item

What connector size does the 30 ft HDMI 2.0 cable need to fit into?

The cable uses standard HDMI male connectors at both ends, so it fits any full-size HDMI 2.0 port on a TV, monitor, projector or AV receiver without an adapter.

How do I route the 30 ft cable and what step is often missed?

Run the 28 AWG cable along walls or through conduit, then secure it with low-profile clips; the step people miss is testing 4K 60 Hz signal before the cable is permanently fixed in place.

When should the 30 ft HDMI 2.0 cable be replaced?

Replace it if the 2.25 GB/s link drops frames, shows sparkles or loses audio, or if the shielding or 28 AWG conductors are kinked, crushed or corroded at the male ends.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.