We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A cardboard box containing two sealed lead-acid batteries

RefurbUPS

RefurbUPS Tripp Lite TE600-V2 Compatible UPS Replacement Battery Kit 2x 12V7A

SKU CH-2PAX-0BFFC

Kit contains two 12 V 7 Ah sealed lead-acid batteries for Tripp Lite TE600-V2 UPS units

  • TypeKit/Package
  • Weight10
  • Kit contains two 12V7A SLA batteries for TE600-V2 UPS
  • Factory-fresh cells ensure reliable backup performance
  • High-rate discharge design supports critical power loads
  • Includes step-by-step installation instructions for easy swap
  • Lightweight 10 lb kit simplifies handling and replacement

Direct Replacement Kit

This kit supplies two 12 V 7 Ah sealed lead-acid batteries built to fit the Tripp Lite TE600-V2 UPS. Each cell is factory fresh and rated for high-rate discharge, matching the original RBC52 specification. The package includes step-by-step installation instructions so the swap can be completed without special tools.

Upgrade From Worn Cells

When the existing batteries no longer hold a charge or the UPS signals a replacement alert, this kit restores full runtime performance. The jump is worth it whenever the unit fails self-test or cannot support the connected load during an outage. No firmware update or hardware modification is required for the changeover.

For TE600-V2 Owners

This product suits anyone who operates a Tripp Lite TE600-V2 and needs to return it to factory runtime. Buyers with a different UPS model or a voltage requirement outside 12 V should look at another kit. Technicians who prefer individual cells without the pre-wired harness will also need a different solution.

Highlights

  • Kit contains two 12V7A SLA batteries for TE600-V2 UPS
  • Factory-fresh cells ensure reliable backup performance
  • High-rate discharge design supports critical power loads
  • Includes step-by-step installation instructions for easy swap
  • Lightweight 10 lb kit simplifies handling and replacement

Specifications

BrandTrippLite Omni Series
SeriesTrippLite Omni Series Batteries
TypeKit/Package
Weight10

Questions about this item

Will the two 12V7A batteries fit inside the original TE600-V2 cartridge housing?

The kit contains two 12V7A sealed lead-acid cells sized to match the original RBC52 cartridge dimensions for the Tripp Lite TE600-V2 UPS.

What is the correct wiring order when installing the two 6V12A batteries in series?

Connect the positive terminal of the first 6V12A battery to the negative terminal of the second, then attach the UPS leads to the remaining free terminals.

How often should the 12V7A SLA batteries be replaced in a Tripp Lite TE600-V2?

Plan to swap the 12V7A cells every three to five years, or sooner if runtime drops noticeably during self-tests.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.