We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A sealed lead-acid battery block, rectangular, grey plastic case, two terminals on top

RefurbUPS

RefurbUPS MGE Pulsar S4 Compatible Replacement Battery Kit 12V7A

SKU CH-G3SX-7EQFF

A 12 V 7 Ah sealed-lead-acid battery kit compatible with MGE Pulsar S4 UPS units

  • TypeKit/Package
  • Weight6
  • Compatible 12V 7A battery restores UPS runtime
  • Single high-rate discharge SLA cell fits MGE Pulsar S4
  • Factory-fresh stock ensures immediate deployment
  • Kit includes one battery plus installation instructions
  • Drop-in cartridge design simplifies maintenance swap

Compatible Replacement Battery Kit for MGE Pulsar

This kit provides a direct replacement battery cartridge for the MGE Pulsar S4 uninterruptible power supply. It contains one 12V7A sealed lead-acid battery designed for high-rate discharge applications. The product is new and factory fresh, intended for users who need to restore backup runtime to their existing UPS unit. Installation instructions are included to guide the replacement process.

Sealed Lead-Acid Chemistry

The 12V7A battery uses valve-regulated lead-acid technology optimised for UPS duty cycles. It delivers the high current bursts required during power transitions without excessive heat buildup under normal float charge conditions. The sealed construction eliminates electrolyte maintenance and allows installation in any orientation. Operational noise is limited to the host UPS cooling system, as the battery itself has no moving parts.

Restores Original Runtime for Ageing UPS Units

This kit replaces a depleted original battery cartridge in a compatible MGE Pulsar S4 UPS, returning the system to its factory backup specification. The upgrade is worthwhile when the existing battery no longer holds sufficient charge to support connected equipment during outages. It is not suitable for expanding runtime beyond the original design or for use in UPS models outside the Pulsar S4 series.

Highlights

  • Compatible 12V 7A battery restores UPS runtime
  • Single high-rate discharge SLA cell fits MGE Pulsar S4
  • Factory-fresh stock ensures immediate deployment
  • Kit includes one battery plus installation instructions
  • Drop-in cartridge design simplifies maintenance swap

Specifications

BrandMGE
SeriesMGE UPS Batteries
TypeKit/Package
Weight6

Questions about this item

How is the 12V7A SLA battery installed in the MGE Pulsar S4 UPS, and which step is often missed?

Power off and unplug the UPS, remove the front cover, disconnect the old battery leads noting polarity, connect the new battery matching red to positive and black to negative, then refit the cover before restoring power. The step often missed is verifying lead polarity before tightening the terminals.

What maintenance or replacement will the 12V7A SLA battery need later?

The sealed lead-acid battery typically requires replacement every three to five years depending on ambient temperature and discharge cycles; no water topping or electrolyte checks are needed.

What limit appears first when the 12V7A SLA battery runs under sustained load?

The high-rate discharge chemistry delivers the rated 7 Ah capacity, but runtime shortens as cell voltage drops under continuous current draw, so the practical limit is the voltage cutoff threshold of the UPS inverter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.