We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver gravity-feed airbrush with .2mm nozzle and 2cc cup

POINTZERO

POINTZERO PZ-410 .2mm gravity-feed airbrush set

SKU CH-TPXP-NV4W7

A dual-action gravity-feed airbrush with a 0.2 mm nozzle and 2 cc cup for fine-detail spraying

  • Craft TypeCraft Accessories
  • ColorSilver
  • Dual-action trigger gives independent air and fluid control
  • Precision-crafted body provides a balanced feel in the hand
  • Tight-tolerance head delivers razor-sharp detail with fine atomization
  • Needle backstop enables consistent line widths for repeatable results
  • Includes seven downloadable airbrushing guides for skill development

POINTZERO PZ-410 dual-action gravity-feed airbrush

The PZ-410 is a dual-action internal-mix airbrush built for artists and hobbyists who need fine control over both air and fluid flow. Its precision-crafted body balances well in the hand for extended detail work such as illustration, model finishing or cake decorating. A .2 mm nozzle comes pre-installed for razor-sharp atomisation.

Installation notes and common pitfalls

The set includes a barbed hose connector that threads to the standard 1/8" BSP fitting on the airbrush body. A single-piece tail gives quick access to the needle chuck for cleaning or needle changes. The most frequent issue is tip-dry at the .2 mm tip; the stainless-steel needle and solvent-resistant packing reduce it, but regular wiping during use is still required.

Practical limits of the gravity-feed system

The 2 cc cup suits small batches of paint or medium and keeps the sight line clear for intricate patterns. Because the cup is tiny, you must refill often on larger projects. The gravity feed also requires the airbrush to stay upright; tilting beyond a shallow angle starves the nozzle and breaks the spray pattern.

Highlights

  • Dual-action trigger gives independent air and fluid control
  • Precision-crafted body provides a balanced feel in the hand
  • Tight-tolerance head delivers razor-sharp detail with fine atomization
  • Needle backstop enables consistent line widths for repeatable results
  • Includes seven downloadable airbrushing guides for skill development

Specifications

BrandPointZero
Craft TypeCraft Accessories
ColorSilver

Questions about this item

How do I verify the 0.2 mm nozzle is atomizing correctly after setup?

Spray water through the airbrush; a consistent pattern from a hairline up to one inch with no sputtering confirms the tight-tolerance head is working.

Which accessories are included in the PZ-410 box and what must I supply?

The set includes a barbed hose connector, paint pipette, nozzle wrench, instruction sheet and seven downloadable guides; you must provide an air source with a standard 1/8 inch BSP fitting.

Should I choose the .2 mm nozzle version or a larger tip for fine detail?

The pre-installed 0.2 mm nozzle is designed for razor-sharp detail and hairline spray; select it when precision outweighs coverage speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.