We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
USB 3.0 to SATA adapter cable with 22 pin connector for 2.5 and 3.5 inch drives

Vszerda

Vszerda USB 3.0 to SATA adapter cable 22 pin 2.5 3.5 inch

SKU CH-GAWM-6RAZ4

Connect 2.5 or 3.5 inch SATA drives via USB 3.0 at 5Gbps with UASP support, up to 12TB, no enclosure needed

  • Add storage, backups or recovery by connecting any 2.5 or 3.5 inch SATA drive
  • Transfer files up to 70 percent faster with UASP on USB 3.0 at 5Gbps
  • Carry the lightweight adapter anywhere — no external power needed for 2.5 inch drives
  • Swap drives instantly without opening an enclosure or using tools
  • Works with SATA III, II and I SSDs or HDDs up to 12TB capacity

USB 3.0 to SATA adapter for 2.5 and 3.5 inch drives

The Vszerda adapter cable connects a SATA III, II or I solid-state drive or hard disk to a USB 3.0 port. It supports 2.5 and 3.5 inch form factors up to 12 TB capacity. UASP support can raise throughput above standard USB 3.0 when the host also implements UASP. A 12 V 2 A power supply with a 5.5 by 2.1 mm jack is required for 3.5 inch drives and is not included.

Suits laptop users adding temporary storage

The cable is aimed at anyone who needs to read or write a bare SATA drive without installing it inside an enclosure. It works for backups, disk imaging, data recovery and moving files between systems. Builders who want a permanent internal connection, or who need to attach drives that are not SATA, should look at a different solution.

12 V 2 A power requirement for 3.5 inch drives

A 3.5 inch hard disk will not spin up unless the DC jack receives 12 V at 2 A from an external adapter. The adapter itself draws no extra power for 2.5 inch SSDs or hard disks. Confirm you have a suitable 5.5 by 2.1 mm supply before ordering if you plan to use 3.5 inch media.

Highlights

  • Add storage, backups or recovery by connecting any 2.5 or 3.5 inch SATA drive
  • Transfer files up to 70 percent faster with UASP on USB 3.0 at 5Gbps
  • Carry the lightweight adapter anywhere — no external power needed for 2.5 inch drives
  • Swap drives instantly without opening an enclosure or using tools
  • Works with SATA III, II and I SSDs or HDDs up to 12TB capacity

Specifications

No published specifications for this item yet.

Questions about this item

Will the 22-pin SATA connector or the USB 3.0 plug wear out first after repeated drive swaps?

The 22-pin SATA connector is rated for many insertion cycles; the USB 3.0 plug is similarly durable, so neither is expected to fail before the other under normal use.

What caps the transfer rate when cloning a 12 TB drive for hours?

The USB 3.0 5 Gbps interface and UASP support set the ceiling; sustained throughput will not exceed that link speed.

How warm does the adapter get and does it draw extra power when a 3.5-inch HDD runs all day?

The adapter itself stays cool; a 3.5-inch HDD requires the separate 12 V 2 A power supply (5.5×2.1 mm jack), so all drive power comes from that brick, not the USB port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.