Pastall USB 2.0 Splitter 1 to 3 Black 30cm 480 Mbps
A USB 2.0 splitter turns one port into three for data at 480 Mbps and 5 V/1.5 A charging, 30 cm long
- TypePlug and Play
- ColorBlack
- SpecificationsPlug and Play, Plastic, 4, 480 kilobits_per_second, usb2.0,
- Connector A1x USB 2.0 male
- Connector B1x USB 2.0 female
- Connector PlatingPlastic, Black
- Connect three USB devices from one port with 1-to-3 splitter
- Plug-and-play operation needs no drivers or software installation
- Data transfer up to 480 Mbps for USB 2.0 peripherals
- 30 cm cable length keeps setup tidy and flexible
- Lightweight 0.041 kg design adds minimal bulk to connections
One USB-A port to three USB-A ports
The Pastall USB 2.0 splitter turns a single USB-A socket into three ports for connecting peripherals such as keyboards, mice, flash drives, game controllers or external hard drives. It works with Windows PCs, Macs, PlayStation and Xbox consoles and any device that supports USB On-The-Go. The 30 cm cable is plug-and-play and requires no drivers. It is intended for data and low-power charging only, not for video output.
Upgrade from a single built-in port
If your laptop, console or phone has only one USB-A port and you need to attach several accessories at once, this adapter removes that bottleneck. The jump is worthwhile when you regularly swap cables or use a hub that occupies the only port. It does not increase the total bandwidth beyond the 480 Mbps shared across all three ports, so high-throughput devices will run slower when used together.
Check power and OTG support before ordering
Verify that your host device can supply enough current for the combined load; the splitter supports up to 5 V / 1.5 A total, so charging will be slow and high-power drives may not spin up. Phones and tablets must explicitly support USB OTG for the adapter to function. The product is not compatible with Android Auto or Apple CarPlay vehicle systems.
Highlights
- Connect three USB devices from one port with 1-to-3 splitter
- Plug-and-play operation needs no drivers or software installation
- Data transfer up to 480 Mbps for USB 2.0 peripherals
- 30 cm cable length keeps setup tidy and flexible
- Lightweight 0.041 kg design adds minimal bulk to connections
Specifications
| Brand | Pastall |
|---|---|
| Model | 1Pcs Black 1 to 3 Splitter |
| Type | Plug and Play |
| Color | Black |
| Specifications | Plug and Play, Plastic, 4, 480 kilobits_per_second, usb2.0, 0.041 kilograms, 1Pcs Black 1 to 3 Splitter |
| Connector A | 1x USB 2.0 male |
| Connector B | 1x USB 2.0 female |
| Connector Plating | Plastic, Black |
| Cable Jakcet Type | Plastic |
| Features | Plug and Play |
| Weight | 0.041 kilograms |
| Package Quantity | 1 |
| Package Contents | 1 x Pastall x 1Pcs Black 1 to 3 Splitter |
| Disclaimer | not_applicable |
Questions about this item
What USB port size and cable length does the Pastall 1-to-3 splitter need to plug into my laptop?
The splitter has a USB 2.0 male connector and a 30 cm cable, so it fits any standard USB-A port and reaches nearby devices without strain.
Do I need to install drivers or change any settings before using the three female ports?
No drivers are required; just plug the male end into the host and connect peripherals to the three female ports. The step users miss is checking that the host can supply enough current for all attached devices.
How often should I replace the braided nylon cable or the USB connectors?
The double braided nylon jacket and alloy casings are built for daily bending; replace the splitter only if the connectors become loose or the cable shows visible fraying.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
STARTECH
STARTECH C6PATCH1RD 1 ft Red Cat6 network ethernet cable
- others
- 1 ft
$5.99
0.00007225BTC
In stock