We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic drive caddies with open side slots and integrated SATA connectors

Orico

Orico 2.5 to 3.5 SATA Hard Drive Adapter 2-Pack 1125SS-2

SKU CH-0CTY-CKVHK

Converts 2.5-inch SATA drives to 3.5-inch form factor with built-in SATA III interface for 6Gbps speeds, hot-swap support and secure screw mounting in desktop bays

  • ColorBlack

Model 2 Packs

  • Converts 2.5″ drives to 3.5″ form factor for desktop installation
  • SATA III interface delivers up to 6Gbps transfer speeds
  • Supports hot-swap and plug-and-play without extra cables or drivers
  • Fits 7mm, 9.5mm and 12.5mm drive heights securely with screw mounting
  • Open-sided design improves heat dissipation for the installed drive

Converts 2.5 SATA drives to 3.5 form factor

This two-pack of Orico adapters lets you install 2.5-inch SATA hard drives or SSDs into standard 3.5-inch drive bays. Each bracket matches the exact dimensions and screw-hole pattern of a 3.5-inch drive so it fits without modification. The integrated SATA III connector eliminates separate data cables and supports hot-swap operation. Black ABS construction with open side slots aids heat dissipation.

Suits desktop builders adding laptop-class SATA

Ideal for anyone fitting 7 mm, 9.5 mm or 12.5 mm SATA SSDs or HDDs into desktop cases, server chassis or 3.5-inch hot-swap trays. Not for 2.5-inch drives that use a different interface, nor for 3.5-inch drives that already fit the bay. Also unsuitable if your mounting points require a different hole spacing.

Built-in SATA III interface runs at 6 Gbps

The adapter itself carries a SATA 3.0 connector rated for 6 Gbps maximum throughput and is backward compatible with SATA I and II. This single specification determines whether your drive can reach its full speed potential when installed in the bracket.

Highlights

  • Converts 2.5″ drives to 3.5″ form factor for desktop installation
  • SATA III interface delivers up to 6Gbps transfer speeds
  • Supports hot-swap and plug-and-play without extra cables or drivers
  • Fits 7mm, 9.5mm and 12.5mm drive heights securely with screw mounting
  • Open-sided design improves heat dissipation for the installed drive

Specifications

ColorBlack

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What type of drive bay or enclosure must I already have to install this adapter?

You need a standard 3.5-inch drive bay or tray that accepts a 3.5-inch form factor, as the bracket matches those exact dimensions and screw-hole positions.

Will my existing SATA I or SATA II cables and motherboard ports work with this adapter?

Yes, the built-in SATA 3.0 interface is backward compatible with SATA I and SATA II, so your current cables and ports will function normally.

How can I verify the adapter is delivering the expected 6Gbps link speed after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6 Gbps when a SATA III drive is seated and the host controller supports SATA 3.0.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.