We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 2.5 to 3.5 inch SATA drive adapter with side ventilation slots

Orico

Orico 1125SS 2.5 to 3.5 inch SATA hard drive adapter

SKU CH-MXE0-NJ6F7

Converts 2.5 inch SATA drives to 3.5 inch form factor for desktop bays, supporting 7mm, 9.5mm and 12.5mm heights with SATA 3.0 6Gbps interface

  • ColorBlack

Model 1 Pack

  • Converts 2.5" drives to 3.5" form factor for desktop bays
  • Matches 3.5" dimensions, weight and screw holes for secure mounting
  • Supports 7mm, 9.5mm and 12.5mm SATA HDDs and SSDs
  • Works with SATA I, II and III interfaces up to 6Gbps
  • Side slots and open design improve airflow for heat dissipation

2.5 to 3.5 inch SATA drive adapter

The Orico 1125SS adapter converts a 2.5 inch SATA hard drive or SSD into a 3.5 inch form factor. It matches standard 3.5 inch dimensions, weight and screw-hole positions for direct installation in desktop drive bays. The black plastic caddy accepts drive thicknesses of 7mm, 9.5mm and 12.5mm. It supports SATA I, II and III interfaces with a theoretical 6Gbps transfer rate.

Desktop builders fitting laptop drives

This adapter suits anyone installing a 2.5 inch SATA HDD or SSD into a 3.5 inch bay in a desktop chassis or server. It also works for users renewing older drives that lack a native 3.5 inch frame. Builders using drives with interfaces other than SATA, or those needing an external USB enclosure, should consider a different product.

SATA I, II, III interface support

The caddy passes through the native SATA connection of the installed drive, supporting SATA I, II and III signalling up to 6Gbps. No bridge chip or protocol conversion is present, so performance depends entirely on the drive and host controller used. Verify that your system provides a standard SATA data and power connector for the 3.5 inch bay.

Highlights

  • Converts 2.5" drives to 3.5" form factor for desktop bays
  • Matches 3.5" dimensions, weight and screw holes for secure mounting
  • Supports 7mm, 9.5mm and 12.5mm SATA HDDs and SSDs
  • Works with SATA I, II and III interfaces up to 6Gbps
  • Side slots and open design improve airflow for heat dissipation

Specifications

ColorBlack

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What drive thicknesses does the 1125SS adapter accept?

The adapter accepts 2.5-inch SATA HDDs and SSDs measuring 7mm, 9.5mm, or 12.5mm thick.

How is the 2.5-inch drive secured inside the 1125SS bracket?

The drive is fixed with the included screws through the side mounting holes, matching standard 3.5-inch screw spacing.

Does the 1125SS adapter require any active cooling or replacement parts over time?

No active cooling is needed; the open side slots provide passive airflow, and the plastic bracket has no moving or consumable parts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.