We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optdex Palo Alto QSFP28 transceiver module, rectangular metal housing, MTP/MPO-12 port, 1310nm 500m OS2, 4x 25G-LR

Optdex

Optdex Palo Alto QSFP-100G-PSM4 SFP transceiver

SKU CH-HWB0-DTWXA

100 Gbps QSFP28 transceiver with four 25 Gbps lanes over 1310 nm single-mode fibre up to 500 m using MTP/MPO-12 connectors

  • Device TypeTransceiver
  • 100 Gbps throughput for high-density links
  • 500 m reach over OS2 single-mode fibre
  • 1310 nm wavelength with DOM monitoring
  • MTP/MPO-12 connector splits into four 25 G lanes

Compatible 100G QSFP28 transceiver

The Optdex Palo Alto QSFP-100G-PSM4 module provides a 100GBASE-PSM4 link for Palo Alto Networks equipment. It operates over OS2 single-mode fibre using a 1310nm wavelength and reaches 500 metres. An MTP/MPO-12 connector carries four parallel lanes, each running at 25G. Digital optical monitoring is supported.

Sustained 500m parallel operation

Under continuous load the transceiver maintains four independent 25G channels across the full 500 metre OS2 distance. The parallel SMF design keeps each lane stable without the signal degradation seen in shorter-reach alternatives. DOM data remains available for real-time health checks during extended runs.

Highlights

  • 100 Gbps throughput for high-density links
  • 500 m reach over OS2 single-mode fibre
  • 1310 nm wavelength with DOM monitoring
  • MTP/MPO-12 connector splits into four 25 G lanes

Specifications

Device TypeTransceiver

Questions about this item

How much power does the QSFP28 module draw during continuous operation?

The transceiver uses 4x 25G lanes at 1310 nm over OS2 fibre, a design that typically stays within the QSFP28 power envelope for 100G PSM4 optics.

Which patch cables and port type are required to connect this module?

It needs OS2 single-mode fibre with MTP/MPO-12 connectors and a QSFP28 port that supports 100GBASE-PSM4 parallel optics.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.