We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UV red SATA cable with 90 to 180 degree connectors, two feet long

Nippon Labs

Nippon Labs SATA3L2FT90/180RD 2 ft SATA cable 90 to 180 degree UV Red

SKU CH-K331-GKR4T MPN SATA3L2FT90/180RD

Two-foot SATA III cable with a 90-degree to 180-degree locking connector, UV-red rubber sleeving and 6 Gb/s support

  • TypeSATA III
  • ColorUV Red
  • Length2 ft.
  • Cable Length2 ft.
  • Connector Number2
  • Connector Detail90 degree to 180 degree
  • SATA 6 Gb/s speed with 1.5 and 3 Gb/s backward compatibility
  • 90 to 180 degree connectors fit tight drive bays
  • Locking latch secures the connection during moves
  • UV Red rubber sleeving resists bends and twists
  • RoHS compliant build meets environmental standards

Product identity

This Nippon Labs SATA III cable connects a host controller to a single drive using one 90-degree and one 180-degree locking latch connector. The two-foot length suits internal routing in standard chassis layouts.

Setup check

Verify that the target device and motherboard port both accept standard SATA data connectors and that the 90-degree and 180-degree orientations match the available clearance around each socket. The cable supports 6 Gb/s operation and remains backward compatible with 3 Gb/s and 1.5 Gb/s links.

Thermals noise power

Passive construction means the cable adds no fan noise or active heat to the system. Flexible rubber sleeving tolerates repeated bending during installation without degrading signal integrity. RoHS-compliant materials meet restricted-substance requirements.

Highlights

  • SATA 6 Gb/s speed with 1.5 and 3 Gb/s backward compatibility
  • 90 to 180 degree connectors fit tight drive bays
  • Locking latch secures the connection during moves
  • UV Red rubber sleeving resists bends and twists
  • RoHS compliant build meets environmental standards

Specifications

BrandNippon Labs
ModelSATA3L2FT90/180RD
TypeSATA III
ColorUV Red
Length2 ft.
Cable Length2 ft.
Connector Number2
Connector Detail90 degree to 180 degree
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.01 kg
Package size174 × 79 × 23 mm

Questions about this item

Does the 2 ft UV Red cable include both the 90 degree and 180 degree connectors or do I need a separate straight cable?

The cable has two connectors — one 90 degree and one 180 degree — so no extra cable is required for either orientation.

Should I pick the 90-to-180 version or a straight-to-straight version for a tight drive bay?

Choose the 90-to-180 version when one port sits against a sidewall; the 90 degree end hugs the board while the 180 degree end runs straight out.

Will the 6 Gb/s rating actually deliver that speed on my older 3 Gb/s motherboard?

The cable is backward compatible with 3 Gb/s and 1.5 Gb/s ports, so it will work at the maximum speed your motherboard supports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.