Nippon Labs
Nippon Labs 60CAT8-5-24GY-10P network ethernet cable 5 ft Cat 8 24 AWG gray 10 pack
Ten-pack of 5 ft Cat 8 patch cables rated for 40 Gbps at 2 GHz with S/FTP shielding and gold-plated RJ45 contacts
- TypeNetwork Ethernet Cables
- Cat8
- Connector ARJ45
- Connector BRJ45
- Length5 ft.
- ColorGray
- Supports 40 Gbps speeds for demanding networks
- 2000 MHz bandwidth handles 25G and 40GBASE-T
- S/FTP shielding protects each pair from interference
- 50 µm gold-plated contacts resist corrosion
- Ten 5 ft cables ready for rack installs
Ready for 40 Gbps networks
This 10-pack of Cat 8 patch cords delivers up to 40 Gbps at 2000 MHz over five-foot gray runs. Each cable uses 24 AWG stranded pure copper conductors with individual foil shielding plus an overall braid shield. The RJ45 plugs carry 50 µm gold-plated contacts and a snagless, strain-relieved boot. Backward compatibility covers Cat 5e, Cat 6, Cat 6A and Cat 7 equipment.
Fits standard RJ45 ports
The RJ45 connectors mate with any Gigabit, 10G or 25G BASE-T port on switches, routers, servers or desktop NICs. Shielded construction suppresses alien crosstalk in dense cable bundles, freeing bandwidth for 25GBASE-T and 40GBASE-T links. A CM-rated PVC jacket meets in-wall and riser routing requirements without additional conduit. The five-foot length suits rack-to-patch-panel or desk-to-wall-plate runs.
Passive copper, no power draw
As unpowered copper assemblies the cables add no thermal load and generate no audible noise. Shielding and gold-plated contacts maintain signal integrity across the full 2000 MHz spectrum during sustained 40 Gbps transfers. RoHS-compliant materials and UL/ETL-verified TIA/EIA compliance ensure consistent performance in typical office or data-centre ambient conditions.
Highlights
- Supports 40 Gbps speeds for demanding networks
- 2000 MHz bandwidth handles 25G and 40GBASE-T
- S/FTP shielding protects each pair from interference
- 50 µm gold-plated contacts resist corrosion
- Ten 5 ft cables ready for rack installs
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-5-24GY-10P |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Gray |
| Shielded | Each pair Foil shielded / 4 Pair Braid Shield |
| Wire Gauge | 24 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs, |
| Shipping weight | 1.36 kg |
| Package size | 254 × 203 × 76 mm |
Questions about this item
Will the 24 AWG conductors limit the 40 Gbps speed on a 5 ft run?
The 24 AWG stranded copper is rated for the full 40 Gbps at this length; Cat 8 specifies 2000 MHz bandwidth over short links.
Does the S/FTP shielding and PVC jacket keep the cable cool and quiet during all-day 40 Gbps traffic?
Passive copper generates no noise and negligible heat; the foil-and-braid shield only protects signal integrity, not temperature.
What port speed must my switch or NIC already have to use these cables at 40 Gbps?
Both ends need 25GBASE-T or 40GBASE-T RJ45 ports; the cables are backward compatible with slower Cat 5e, 6 and 6A gear.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



